[Dakkerz]

Running the power cable was probably the biggest PIA of the project. The grommet was a lot thicker than I thought it was going to be. Also you have to remember to not only remove the battery cover, but also the plastic cover that runs along the passenger side of the front windsheild. (there are to tabs you have to remove for that cover). I pretty much just used the write up from the second link I posted on here a few days ago to do the rest.

As for the grommet I used a little bit of black silicone to seal it up.

Good luck with the install. Just send me a PM if you have any other questions once you start.