[Vrod-Mike]

Well even though it took longer then I thought I got just about everything done today. The only thing I didn't do was the Tein EDFC. I'll do that next weekend. Here's what got done today.

Front & rear swaybars
Front and rear camber kits
Tein CS coilovers
MREV2
5/16" spacer

I couldn't do the rear Toe bolt because I didn't have the tool at home to elongate the rear hole so I'll do that next weekend. Plus I'll also be doing my exhaust so it will be easier to drill that hole out with the exhaust out of the way.

I found it odd that when installing the MREV2 and spacer that MD tells you to discard the stock plenum gasket. Without it I think that some oil vapor will get into the intake, but I did it according to the instructions anyway. I sent an email to Tony asking him, so I'll see what he says about it. Below are some pics from today.



Installation of MREV2 & spacer:











Front swaybar:







Rear swaybar:



Front camber kit & coilovers:













Rear camber kit and Tein:













I'll take some pics as soon as I can to show everyone the drop, but the rear didn't drop near as much as the front. I have to play with the settings on the shocks and I'm sure the springs will settle a little, but even with the rears set at the lowest setting I only have a little less then a 1" drop in the back. Is that normal?