[haagen_dazs]

bump?

Originally Posted by haagen_dazs

i trying to understand offsets and what would fit and not fit.

i currently have the stock oem 19s on my 06G35Coupe

Front: 19"x8" +30mm offset
Rear: 19"x8.5" +33mm offset

Everything is bone stock.

1) The oem 19 wheels are not completely flushed. Assuming if one wants them to be flushed, what kind of spaces are needed in front and rears ? (more so for the rears)

2) i am looking to get 18" wheels.
What ranges of offset would allow the wheels to look good and decent (wheels can be flushed or just slightly in the wheel well but not deep inside the well )

IF the width depth is 8" , applying the same logic
will +30mm offsets work for 18"x8" for front and +33mm offsets work for rear ??

what if the manufacturer only have offsets that are +35mm, does that mean the front wheel will be stick out 5mm more for the front (Compared to the stock 19oem) and 2mm more for the rear (compared to the stock 19oem) ?

3) What if the width is 8.5" deep,
then what kind of offsets would work for wheels?
can i apply the same logic based on the OEM19 wheels and say that the offset should hover around +33mm

4) similarly, if the width goes to 9", what kind of offsets would work then?


many thanks