Help with camshaft position sensor
#1
Join Date: Dec 2005
Location: Fort Worth
Posts: 310
Likes: 0
Received 0 Likes
on
0 Posts
Help with camshaft position sensor
Hi,
I am trying to replace my camshaft position sensor. I managed to get the bolt off that holds it in place, but now it is locked in a green plastic, that i cant seem to remove. I see that the clip moves up and down, but in either location it will not come loose. Anyone done this before? Any tips? Thanks,
I am trying to replace my camshaft position sensor. I managed to get the bolt off that holds it in place, but now it is locked in a green plastic, that i cant seem to remove. I see that the clip moves up and down, but in either location it will not come loose. Anyone done this before? Any tips? Thanks,
#2
#5
Join Date: Dec 2005
Location: Fort Worth
Posts: 310
Likes: 0
Received 0 Likes
on
0 Posts
Originally I got the SES, VDC and slip lights, and pulled the P0340 code. I had problems with the engine being hard to start, and what felt like a loss of power while driving. I had 6 codes appear on the OBD-II scanner, but they were all the same. I replaced the camshaft position sensor as i mentioned above. The "stalling" problem went away, but the car is still hard to start. I keep clearing the codes, but they keep coming back, but only 4 instead of 6, so it had to have fixed something. Car runs fine other than the starting problem. Any ideas?
#7
Trending Topics
#8
Join Date: Dec 2005
Location: Fort Worth
Posts: 310
Likes: 0
Received 0 Likes
on
0 Posts
#11