Black plastic undercover official name/part number
#1
Black plastic undercover official name/part number
Does anyone have access to the official name or part number of the two black plastic undercovers on a 2004 G35X? I am talking about the ones you need to remove for an oil change. A recent snow storm ripped off the farther back one (by the transfer case) and I want to know the part number so I can try to find a replacement.
#5
#6
#7
Buy the aluminum one if you dont want to constantly replace it. Cheaper than $665.
https://g35driver.com/forums/g35-sed...its-sedan.html
https://g35driver.com/forums/g35-sed...its-sedan.html
Trending Topics
#9
BOOMSHOCKALOCKA!!! here you go man i found a site http://www.partstrain.com/store/inde...plash%20shield
Last edited by A G Driver; 01-12-2010 at 04:45 PM.
#11
Oil Change Body Under Screws Bolt Missing G35 2006 Infiniti Goupe
Summary:
Need Screws and Bolts originally on front body black plastic undercover of G35 2007 Infiniti Coupe
Details:
I took my car in the dealership for oil change.
When I looked underneath the front, that undercover plastic park was missing screws and bolts.
I'd rather no go back to the dealership at this point.
Where do get these screws and bolts.
There was mention of infinitiusapart.com, but under what part name or number does one look for?
I will just order them myself but I need info
Campy2020
Need Screws and Bolts originally on front body black plastic undercover of G35 2007 Infiniti Coupe
Details:
I took my car in the dealership for oil change.
When I looked underneath the front, that undercover plastic park was missing screws and bolts.
I'd rather no go back to the dealership at this point.
Where do get these screws and bolts.
There was mention of infinitiusapart.com, but under what part name or number does one look for?
I will just order them myself but I need info
Campy2020
#12
Forum did not send me messages about this thread, so I figured nobody had looked at it in a long time, but the answers are here!
Thanks for the search, but I need the cover that is behind the one you sent. Good to know for the main one though.
Thanks Rick. That's what I needed. Now I just need to convince myself that $76 is worth it for a square foot of plastic. I'll be in touch.
BOOMSHOCKALOCKA!!! here you go man i found a site http://www.partstrain.com/store/inde...plash%20shield
Thanks Rick. That's what I needed. Now I just need to convince myself that $76 is worth it for a square foot of plastic. I'll be in touch.
#13
Thread
Thread Starter
Forum
Replies
Last Post