DIY: Upgrade your ugly FOB to a nicer Infiniti Smartkey

[sleek6mt]

what soldering gun do you guys use, im kinda intimidated since the soldering spots on the board are really small. dont wanna waste 2 remotes

[Dakkerz]

just curious where do i solder the wire on spots that don't have a hole to poke through? Do i just solder it to the top or tape it down?

[codeflux]

nice write-up, but i'll keep my responder remote, thank you very much. btw, the keychain reads "your criticism is appreciated - fvck you very much".

[redlude97]

Originally Posted by sleek6mt

what soldering gun do you guys use, im kinda intimidated since the soldering spots on the board are really small. dont wanna waste 2 remotes

I just used a generic $20 one

[redlude97]

Originally Posted by Dakkerz

just curious where do i solder the wire on spots that don't have a hole to poke through? Do i just solder it to the top or tape it down?

solder directly to the metal

[PatZX300]

Anybody know if the G35 recall ones will work? The overall shape looks the same. If anyone knows they will I have a whole toolbox full of them.

[parklife]

Originally Posted by PatZX300

Anybody know if the G35 recall ones will work? The overall shape looks the same. If anyone knows they will I have a whole toolbox full of them.

I think it will work. Remember, we just need the casing, not the internal stuff. They recalled it because of the memory issue. If you have a lot, i'll pay for one that is still in a good shape. PM me.

[O HELLA OEM]

Originally Posted by codeflux

nice write-up, but i'll keep my responder remote, thank you very much. btw, the keychain reads "your criticism is appreciated - fvck you very much".

heey what kind of python remote is that?...did you have to get a whole new alarmsystem with that or you still use the factory one? jw thanks

[maXmood]

hii..

i just registered over here to try and finish this DIY.. btw, i'm registered over my350z.com, but this full DIY isn't posted there.

i just want to clear out some doubts.



for the unlock button, do i really require a second wire that comes out from the same spot that it goes for the lock button??

the whole remote control is running fine so far, it's just that i'm missing the unlock button, and i've tried using the same wire that goes to the lock button, but it doesn't seems to work.. i'll try to get a picture this evening and post it up here of what i have reach so far.

thnx

[Ferrarimanic360]

Originally Posted by PatZX300

Anybody know if the G35 recall ones will work? The overall shape looks the same. If anyone knows they will I have a whole toolbox full of them.

sell me one!

[maXmood]

guys... need help here..

i'm really stuck with the unlock button.. it won't work.. any ideas??

thnx

[redlude97]

Originally Posted by maXmood

hii..

i just registered over here to try and finish this DIY.. btw, i'm registered over my350z.com, but this full DIY isn't posted there.

i just want to clear out some doubts.



for the unlock button, do i really require a second wire that comes out from the same spot that it goes for the lock button??

the whole remote control is running fine so far, it's just that i'm missing the unlock button, and i've tried using the same wire that goes to the lock button, but it doesn't seems to work.. i'll try to get a picture this evening and post it up here of what i have reach so far.

thnx

no, you can just use the same wire. Easy way to check if you have it wired correctly is to take a small peice of wire, and touch it to both wires for the unlock function and see if it unlocks the car.

[maXmood]

^thnx for the reply..

i tried using the same wire, but it doesn't seems to work.. it probably has a different circuit.. :S

i'm not fimiliar with those circuits or even electronic boards, but i'm not giving up on it.. i'm trying to get a pic, but i can't find the batteries to my cam.

[maXmood]

finally got the pic..



and that's parklife's work..

[maXmood]

figured.!

thnx for the write-up!