My 2003-04 G35 Double Din Conversion DIY Guide

[ProfanityPete]

Originally Posted by docron1

2. When ordering the DD trim finisher and the JDM AC controller from wherever (Japan, Grubbs, Riverside Infiniti, etc) you DO NOT need the aluminum bracket as you can use your stock one.

So to clarify, you're sure that you don't need to buy this?

You can use the one from the stock HU without any modification?

[Gilley]

Originally Posted by ProfanityPete

So to clarify, you're sure that you don't need to buy this?

You can use the one from the stock HU without any modification?

No, you don't need that bracket.

[Kingpip18]

How much of this differs for a 2005 conversion?

[kwb0748]

i have a 04 w/nav. coupe. i am replacing the factory nav with my pioneer z2. can i intergrate the factory pop up screen as a back up screen or a video out from my pioneer?

[just4kickz]

Hey guys, I just had a new double-din deck put in (Pioneer AVH-P4000DVD) along with a new Metra Integration Adapter dash kit put in at my local shop. However, now the stock Navigation screen is unable to pop up since the deck is blocking it. What should I do? I really want to get my Navigation back. Would a different sized deck work?
Do I need the 03-04 Double Din Bracket With Navigation?
http://www.grubbsperformance.com/servlet/Detail?no=2693
Any advice would help. Thanks.

Links to the Deck and Adapter:
(http://www.crutchfield.com/S-FDW6C7Y...VHP400&tp=5684)
http://www.crutchfield.com/App/Produ...ra&i=120997604

[Gilley]

It may be the Metra kit preventing your navi from popping up. The JDM trim piece is made to work with the navigation regardless of the head unit. As long as the head unit fits in the metal cage, it should work fine with the navi.

[just4kickz]

So what do I need to buy now to fix this? Thanks.

[Gilley]

If the Metra kit is the cause, the JDM trim kit and AC controller would be a solution. Otherwise, you may be able to modify the Metra kit to work.

[williamjv]

Guys by any chance do you have a link or a part number as to which radio hardness do i need to purchase to install the aftermarket radio to my 03 G35 Sedan (with bose amp) once I'm done installing the JDM DD kit?

[williamjv]

Just noticed that harness NN01 from Scosche was used here; however, I googled it and nothing came up, I even went to the Scosche site and searched for NN01 and nothing, I did searched for 03 and 04 G35 Sedan and these 2 hardness come up NN03B and NN03RB. Any idea if these ones will work? I had purchesed part number 70-7550 from a local car audio shop ( http://metraonline.com/products.aspx?s=70-7550 ) but dont know if it'll work.

Anyone knows where can i get NN01 from or is NN03 the same part?

[jpez179]

Is there any word about a JDM Double DIN conv with the duel control or do we still have to souder the control.???

[aRT13]

^I'm wondering the same thing.

[real3997]

Could they have mad eit any harder to change out the stereo....

[rollingrocksrol]

Hi...I finally did my much enticipated DD installation but unfortunately the temp is stuck at 70 and temp up and down button wont work. every other button on the metra kit works though. I unplugged the metra harness on the hvac system to see if the brittle pins are ok and they were...Please help!!Lastly, i installed avic 700bt and my loudest volume is lower then midway volume on my bose?? i know that pioneer output rca cables are at 2volts. is there a way to completely bypass the factory amp and use pioneer 700bt's amp instead? by the way i used metra harness with the pioneer

[Gilley]

Your cabin air temp sensor is probably unplugged. It is on the right side of the plastic panel at your knees under the steering column.