|
|
|
|||||||
| New! Use your Facebook, Google, AIM & Yahoo accounts to securely log into this site, click logo to login | 
|
| Register | Photo Gallery | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read | Used Cars | Garage | Vendor Directory |
|
|||
|
|
| Welcome to G35Driver.com! |
|
|
Welcome to G35Driver.com. You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join G35Driver.com community today! |
| View Poll Results: What BBK do you have? (please add to thread) | |||
| Racing Brake |
   
|
7 | 2.43% |
| Brembo |
  
|
47 | 16.32% |
| StopTech |
  
|
33 | 11.46% |
| Endless |
  
|
8 | 2.78% |
| Project Mu |
  
|
5 | 1.74% |
| Rotora |
  
|
23 | 7.99% |
| Megan |
|
2 | 0.69% |
| Wilwood |
|
12 | 4.17% |
| Ap Racing (Stillen) |
|
14 | 4.86% |
| I have stock brakes |
|
137 | 47.57% |
| Voters: 288. You may not vote on this poll | |||
 |
|
|
Thread Tools | Rate Thread | Display Modes |
|
#16
02-17-2007, 03:30 PM
|
|||
|
|||
|
Front
Racing Brake 4-Pot 13" 1. Zenetti Five 20x8.5 +40 2. Sevas S-55 20x8.5 +40 (just clears) 3. 5-Zigen FN01R-C 17x8 +43 Brembo 1. StopTech 1. 14.1" 4 pod Amistad 19" Rotino 19X8.5 +37 2. 13" 4 pot, FN01R-C 17x9 +35 (track), otherwise OEM rims 3. 13" ST-40, FN01R-C 17x8 +35 (3-4mm of clearance) 4. 13" ST-40, Stock Mitsu EVO 8 Enkei 17x8 +38 (plenty of clearance) Endless 1. Endless 6 pod 14.1" Amistad 19" Rotino 19X8.5 +37 Project Mu 1. Rotora 1. 6-pot 355mmx32mm Volk GT-7 19"x8.5" +23 high disk 2. 6-pot 355mmx32mm Junction Produce Scara Japan 19"x9.5" +23 high disk (needed 3mm spacer) Megan 1.14.25" / 6 piston with 18" Nismo's 18" Axis Reverbs, most Volk wheels, etc. Wilwood 1. 14.1" 6 piston Wilwood Stock 17" Sedan wheels 2. 13" x 1.37 rotors, SL-6 Wilwood, 17X8 5Zigen wheels 3. AZ Z Car kit, 13" 4-pot FSL, 5Zigen FNO1R-C 17x8 +43 4. 13.06 x 1.38 GT Rotors, SL-6, Volk SF Challenge 19x9.5 +28 (Endless Shock) Ksport 1. AP Racing (Stillen) 1.14.25" / 6 piston with 18" Nismo's 18" Axis Reverbs, most Volk wheels, etc. Rear Racing Brake OEM with 13" rotor 1. Zenetti Five 20x10 +43 2. Sevas S-55 20x10 +40 Brembo 1. StopTech 1. 13" 2-pot, FN01R-C 17x9 +35 (track), OEM otherwise Endless 1. Project Mu 1. Rotora 1. 4-pot 355mmx32mm Volk GT-7 19"x9.5" +24 standard disk 2. 4-pot 355mmx32mm Junction Produce Scara Japan 19"x10.5" +24 medium disk Megan 1. 13.5" 4 piston with 18" Nismo's 18" Axis Reverbs, most Volk wheels, etc. Wilwood 1. Ksport 1. AP Racing (Stillen) 1. 13.5" 4 piston with 18" Nismo's 18" Axis Reverbs, most Volk wheels, etc. 
|
|
#17
02-28-2007, 07:47 PM
|
||||
|
||||
|
Quote:
I got mine direct from racing brake at a great price back when they first came out with the kit, they still give members a nice discount.
__________________
ONE FUN SEDAN!! MY CAR (LINK) Detailed Image | Greddy Twin Turbo & Built Motor by UMS Tuning = 649whp/651wtq | Rotora (12/4pot) | IForged | Quad Projector Retro | 1-off Dual 3", Dual Muffler Turbo-back Exhaust by Nichols AutoFab | NITTO | SPARCO |
|
|
#18
03-22-2007, 11:34 AM
|
|||
|
|||
|
Quote:
__________________
FUNCTIONTUNED:POWER
|
|
#19
07-28-2007, 03:05 PM
|
||||
|
||||
|
Front
Racing Brake 4-Pot 13" 1. Zenetti Five 20x8.5 +40 2. Sevas S-55 20x8.5 +40 (just clears) 3. 5-Zigen FN01R-C 17x8 +43 Brembo 1. StopTech 1. 14.1" 4 pod Amistad 19" Rotino 19X8.5 +37 2. 13" 4 pot, FN01R-C 17x9 +35 (track), otherwise OEM rims 3. 13" ST-40, FN01R-C 17x8 +35 (3-4mm of clearance) 4. 13" ST-40, Stock Mitsu EVO 8 Enkei 17x8 +38 (plenty of clearance) 5. 4-pot 355mx32mm Junction Produce Scara Japan 19"x9.5" +23 high disk with step lip (no spacer required) Endless 1. Endless 6 pod 14.1" Amistad 19" Rotino 19X8.5 +37 Project Mu 1. Rotora 1. 6-pot 355mmx32mm Volk GT-7 19"x8.5" +23 high disk 2. 6-pot 355mmx32mm Junction Produce Scara Japan 19"x9.5" +23 high disk with step lip (needed 3mm spacer) Megan 1.14.25" / 6 piston with 18" Nismo's 18" Axis Reverbs, most Volk wheels, etc. Wilwood 1. 14.1" 6 piston Wilwood Stock 17" Sedan wheels 2. 13" x 1.37 rotors, SL-6 Wilwood, 17X8 5Zigen wheels 3. AZ Z Car kit, 13" 4-pot FSL, 5Zigen FNO1R-C 17x8 +43 4. 13.06 x 1.38 GT Rotors, SL-6, Volk SF Challenge 19x9.5 +28 (Endless Shock) Ksport 1. AP Racing (Stillen) 1.14.25" / 6 piston with 18" Nismo's 18" Axis Reverbs, most Volk wheels, etc. Rear Racing Brake OEM with 13" rotor 1. Zenetti Five 20x10 +43 2. Sevas S-55 20x10 +40 Brembo 1. StopTech 1. 13" 2-pot, FN01R-C 17x9 +35 (track), OEM otherwise 2. 4-pot 355mmx32mm Junction Produce Scara Japan 19"x10.5" +24 medium disk with step lip (does not fit without 10mm spacer!!!) Endless 1. Project Mu 1. Rotora 1. 4-pot 355mmx32mm Volk GT-7 19"x9.5" +24 standard disk 2. 4-pot 355mmx32mm Junction Produce Scara Japan 19"x10.5" +24 medium disk with step lip Megan 1. 13.5" 4 piston with 18" Nismo's 18" Axis Reverbs, most Volk wheels, etc. Wilwood 1. Ksport 1. AP Racing (Stillen) 1. 13.5" 4 piston with 18" Nismo's 18" Axis Reverbs, most Volk wheels, etc.
__________________
[b]2006 G35c 6MT BLACK OBSIDIAN
|
|
#20
07-28-2007, 05:32 PM
|
|||
|
|||
|
Advan T7's in 18x9 +22 and 18x10 +25 should accommodate any BBK. They fit with plenty of room to spare on the AP3700/3750 combo.
 
__________________
Project: Forward Motion - Northeast Nissan / Infiniti Car Club - http://www.projectforwardmotion.com/
|
|
#21
08-02-2007, 02:34 AM
|
||||
|
||||
|
Front
Racing Brake 4-Pot 13" 1. Zenetti Five 20x8.5 +40 2. Sevas S-55 20x8.5 +40 (just clears) 3. 5-Zigen FN01R-C 17x8 +43 Brembo 1. StopTech 1. 14.1" 4 pod Amistad 19" Rotino 19X8.5 +37 2. 13" 4 pot, FN01R-C 17x9 +35 (track), otherwise OEM rims 3. 13" ST-40, FN01R-C 17x8 +35 (3-4mm of clearance) 4. 13" ST-40, Stock Mitsu EVO 8 Enkei 17x8 +38 (plenty of clearance) 5. 4-pot 355mx32mm Junction Produce Scara Japan 19"x9.5" +23 high disk with step lip (no spacer required) 6. 13" 4-pot, iForged Essen 19x8.5 +35 and sometimes OEM sport 18's Endless 1. Endless 6 pod 14.1" Amistad 19" Rotino 19X8.5 +37 Project Mu 1. Rotora 1. 6-pot 355mmx32mm Volk GT-7 19"x8.5" +23 high disk 2. 6-pot 355mmx32mm Junction Produce Scara Japan 19"x9.5" +23 high disk with step lip (needed 3mm spacer) Megan 1.14.25" / 6 piston with 18" Nismo's 18" Axis Reverbs, most Volk wheels, etc. Wilwood 1. 14.1" 6 piston Wilwood Stock 17" Sedan wheels 2. 13" x 1.37 rotors, SL-6 Wilwood, 17X8 5Zigen wheels 3. AZ Z Car kit, 13" 4-pot FSL, 5Zigen FNO1R-C 17x8 +43 4. 13.06 x 1.38 GT Rotors, SL-6, Volk SF Challenge 19x9.5 +28 (Endless Shock) Ksport 1. AP Racing (Stillen) 1.14.25" / 6 piston with 18" Nismo's 18" Axis Reverbs, most Volk wheels, etc. Rear Racing Brake OEM with 13" rotor 1. Zenetti Five 20x10 +43 2. Sevas S-55 20x10 +40 Brembo 1. StopTech 1. 13" 2-pot, FN01R-C 17x9 +35 (track), OEM otherwise 2. 4-pot 355mmx32mm Junction Produce Scara Japan 19"x10.5" +24 medium disk with step lip (does not fit without 10mm spacer!!!) 3. 13" 2-pot, iForged Essen 19x9.5 +45 and sometimes OEM sport 18's Endless 1. Project Mu 1. Rotora 1. 4-pot 355mmx32mm Volk GT-7 19"x9.5" +24 standard disk 2. 4-pot 355mmx32mm Junction Produce Scara Japan 19"x10.5" +24 medium disk with step lip Megan 1. 13.5" 4 piston with 18" Nismo's 18" Axis Reverbs, most Volk wheels, etc. Wilwood 1. Ksport 1. AP Racing (Stillen) 1. 13.5" 4 piston with 18" Nismo's 18" Axis Reverbs, most Volk wheels, etc. Just got the rear BBK in this week to finish the set. 
__________________
|
|
#22
08-02-2007, 11:20 AM
|
|||
|
|||
|
I have Rotora 8/4 pots and 15inch rotors inside Maya GR5 20x9 +26 and 20x10.5 +29.
Front Racing Brake 4-Pot 13" 1. Zenetti Five 20x8.5 +40 2. Sevas S-55 20x8.5 +40 (just clears) 3. 5-Zigen FN01R-C 17x8 +43 Brembo 1. StopTech 1. 14.1" 4 pod Amistad 19" Rotino 19X8.5 +37 2. 13" 4 pot, FN01R-C 17x9 +35 (track), otherwise OEM rims 3. 13" ST-40, FN01R-C 17x8 +35 (3-4mm of clearance) 4. 13" ST-40, Stock Mitsu EVO 8 Enkei 17x8 +38 (plenty of clearance) 5. 4-pot 355mx32mm Junction Produce Scara Japan 19"x9.5" +23 high disk with step lip (no spacer required) 6. 13" 4-pot, iForged Essen 19x8.5 +35 and sometimes OEM sport 18's Endless 1. Endless 6 pod 14.1" Amistad 19" Rotino 19X8.5 +37 Project Mu 1. Rotora 1. 6-pot 355mmx32mm Volk GT-7 19"x8.5" +23 high disk 2. 6-pot 355mmx32mm Junction Produce Scara Japan 19"x9.5" +23 high disk with step lip (needed 3mm spacer) 3. 8-pot 380mmx34mm Maya GR5 20x9 +26 Megan 1.14.25" / 6 piston with 18" Nismo's 18" Axis Reverbs, most Volk wheels, etc. Wilwood 1. 14.1" 6 piston Wilwood Stock 17" Sedan wheels 2. 13" x 1.37 rotors, SL-6 Wilwood, 17X8 5Zigen wheels 3. AZ Z Car kit, 13" 4-pot FSL, 5Zigen FNO1R-C 17x8 +43 4. 13.06 x 1.38 GT Rotors, SL-6, Volk SF Challenge 19x9.5 +28 (Endless Shock) Ksport 1. AP Racing (Stillen) 1.14.25" / 6 piston with 18" Nismo's 18" Axis Reverbs, most Volk wheels, etc. Rear Racing Brake OEM with 13" rotor 1. Zenetti Five 20x10 +43 2. Sevas S-55 20x10 +40 Brembo 1. StopTech 1. 13" 2-pot, FN01R-C 17x9 +35 (track), OEM otherwise 2. 4-pot 355mmx32mm Junction Produce Scara Japan 19"x10.5" +24 medium disk with step lip (does not fit without 10mm spacer!!!) 3. 13" 2-pot, iForged Essen 19x9.5 +45 and sometimes OEM sport 18's Endless 1. Project Mu 1. Rotora 1. 4-pot 355mmx32mm Volk GT-7 19"x9.5" +24 standard disk 2. 4-pot 355mmx32mm Junction Produce Scara Japan 19"x10.5" +24 medium disk with step lip 3. 4-pot 380mm x 34mm Maya GR5 20x10.5 +29 Megan 1. 13.5" 4 piston with 18" Nismo's 18" Axis Reverbs, most Volk wheels, etc. Wilwood 1. Ksport 1. AP Racing (Stillen) 1. 13.5" 4 piston with 18" Nismo's 18" Axis Reverbs, most Volk wheels, etc.
__________________
Sean Florida G Club '03.5 Caribbean Blue 5at Sedan w/ a few mods, '04 Laser Red 6mt Coupe w/ more mods, 06 FX35 bone stock
|
|
#23
11-26-2007, 11:06 PM
|
||||
|
||||
|
Front
Racing Brake 4-Pot 13" 1. Zenetti Five 20x8.5 +40 2. Sevas S-55 20x8.5 +40 (just clears) 3. 5-Zigen FN01R-C 17x8 +43 Brembo 1. StopTech 1. 14.1" 4 pod Amistad 19" Rotino 19X8.5 +37 2. 13" 4 pot, FN01R-C 17x9 +35 (track), otherwise OEM rims 3. 13" ST-40, FN01R-C 17x8 +35 (3-4mm of clearance) 4. 13" ST-40, Stock Mitsu EVO 8 Enkei 17x8 +38 (plenty of clearance) 5. 4-pot 355mx32mm Junction Produce Scara Japan 19"x9.5" +23 high disk with step lip (no spacer required) 6. 13" 4-pot, iForged Essen 19x8.5 +35 and sometimes OEM sport 18's 7. 4-pot 355mmx32mm Anceltion SPSIX Revo 20"x9.5" +27 high disk Endless 1. Endless 6 pod 14.1" Amistad 19" Rotino 19X8.5 +37 Project Mu 1. Rotora 1. 6-pot 355mmx32mm Volk GT-7 19"x8.5" +23 high disk 2. 6-pot 355mmx32mm Junction Produce Scara Japan 19"x9.5" +23 high disk with step lip (needed 3mm spacer) 3. 8-pot 380mmx34mm Maya GR5 20x9 +26 Megan 1.14.25" / 6 piston with 18" Nismo's 18" Axis Reverbs, most Volk wheels, etc. Wilwood 1. 14.1" 6 piston Wilwood Stock 17" Sedan wheels 2. 13" x 1.37 rotors, SL-6 Wilwood, 17X8 5Zigen wheels 3. AZ Z Car kit, 13" 4-pot FSL, 5Zigen FNO1R-C 17x8 +43 4. 13.06 x 1.38 GT Rotors, SL-6, Volk SF Challenge 19x9.5 +28 (Endless Shock) Ksport 1. AP Racing (Stillen) 1.14.25" / 6 piston with 18" Nismo's 18" Axis Reverbs, most Volk wheels, etc. Rear Racing Brake OEM with 13" rotor 1. Zenetti Five 20x10 +43 2. Sevas S-55 20x10 +40 Brembo 1. StopTech 1. 13" 2-pot, FN01R-C 17x9 +35 (track), OEM otherwise 2. 4-pot 355mmx32mm Junction Produce Scara Japan 19"x10.5" +24 medium disk with step lip (does not fit without 10mm spacer!!!) 3. 13" 2-pot, iForged Essen 19x9.5 +45 and sometimes OEM sport 18's 4. 4-pot 355mmx32mm Anceltion SPSIX Revo 20"x10.5" +27 high disk Endless 1. Project Mu 1. Rotora 1. 4-pot 355mmx32mm Volk GT-7 19"x9.5" +24 standard disk 2. 4-pot 355mmx32mm Junction Produce Scara Japan 19"x10.5" +24 medium disk with step lip 3. 4-pot 380mm x 34mm Maya GR5 20x10.5 +29 Megan 1. 13.5" 4 piston with 18" Nismo's 18" Axis Reverbs, most Volk wheels, etc. Wilwood 1. Ksport 1. AP Racing (Stillen) 1. 13.5" 4 piston with 18" Nismo's 18" Axis Reverbs, most Volk wheels, etc.[/quote]
__________________
[b]2006 G35c 6MT BLACK OBSIDIAN
|
|
#24
11-30-2007, 07:54 PM
|
||||
|
||||
|
Front
Racing Brake 4-Pot 13" 1. Zenetti Five 20x8.5 +40 2. Sevas S-55 20x8.5 +40 (just clears) 3. 5-Zigen FN01R-C 17x8 +43 Brembo 1. StopTech 1. 14.1" 4 pod Amistad 19" Rotino 19X8.5 +37 2. 13" 4 pot, FN01R-C 17x9 +35 (track), otherwise OEM rims 3. 13" ST-40, FN01R-C 17x8 +35 (3-4mm of clearance) 4. 13" ST-40, Stock Mitsu EVO 8 Enkei 17x8 +38 (plenty of clearance) 5. 4-pot 355mx32mm Junction Produce Scara Japan 19"x9.5" +23 high disk with step lip (no spacer required) 6. 13" 4-pot, iForged Essen 19x8.5 +35 and sometimes OEM sport 18's 7. 4-pot 355mmx32mm Anceltion SPSIX Revo 20"x9.5" +27 high disk Endless 1. Endless 6 pod 14.1" Amistad 19" Rotino 19X8.5 +37 Project Mu 1. Rotora 1. 6-pot 355mmx32mm Volk GT-7 19"x8.5" +23 high disk 2. 6-pot 355mmx32mm Junction Produce Scara Japan 19"x9.5" +23 high disk with step lip (needed 3mm spacer) 3. 8-pot 380mmx34mm Maya GR5 20x9 +26 4. 12-pot 380x34mm iForged Aero 20x8.5 +40 (also oem Rays 19" coupe wheels and Volk GT-C 20x8.5 +39) Megan 1.14.25" / 6 piston with 18" Nismo's 18" Axis Reverbs, most Volk wheels, etc. Wilwood 1. 14.1" 6 piston Wilwood Stock 17" Sedan wheels 2. 13" x 1.37 rotors, SL-6 Wilwood, 17X8 5Zigen wheels 3. AZ Z Car kit, 13" 4-pot FSL, 5Zigen FNO1R-C 17x8 +43 4. 13.06 x 1.38 GT Rotors, SL-6, Volk SF Challenge 19x9.5 +28 (Endless Shock) Ksport 1. AP Racing (Stillen) 1.14.25" / 6 piston with 18" Nismo's 18" Axis Reverbs, most Volk wheels, etc. Rear Racing Brake OEM with 13" rotor 1. Zenetti Five 20x10 +43 2. Sevas S-55 20x10 +40 Brembo 1. StopTech 1. 13" 2-pot, FN01R-C 17x9 +35 (track), OEM otherwise 2. 4-pot 355mmx32mm Junction Produce Scara Japan 19"x10.5" +24 medium disk with step lip (does not fit without 10mm spacer!!!) 3. 13" 2-pot, iForged Essen 19x9.5 +45 and sometimes OEM sport 18's 4. 4-pot 355mmx32mm Anceltion SPSIX Revo 20"x10.5" +27 high disk Endless 1. Project Mu 1. Rotora 1. 4-pot 355mmx32mm Volk GT-7 19"x9.5" +24 standard disk 2. 4-pot 355mmx32mm Junction Produce Scara Japan 19"x10.5" +24 medium disk with step lip 3. 4-pot 380mm x 34mm Maya GR5 20x10.5 +29 4. 4-pot 355mm x 32mm iForged Aero 20x10 +42 (also Volk GT-C 20x9.5 +47) Megan 1. 13.5" 4 piston with 18" Nismo's 18" Axis Reverbs, most Volk wheels, etc. Wilwood 1. Ksport 1. AP Racing (Stillen) 1. 13.5" 4 piston with 18" Nismo's 18" Axis Reverbs, most Volk wheels, etc.
__________________
ONE FUN SEDAN!! MY CAR (LINK) Detailed Image | Greddy Twin Turbo & Built Motor by UMS Tuning = 649whp/651wtq | Rotora (12/4pot) | IForged | Quad Projector Retro | 1-off Dual 3", Dual Muffler Turbo-back Exhaust by Nichols AutoFab | NITTO | SPARCO |
|
|
#25
01-02-2008, 09:55 PM
|
|||
|
|||
|
Front
Racing Brake 4-Pot 13" 1. Zenetti Five 20x8.5 +40 2. Sevas S-55 20x8.5 +40 (just clears) 3. 5-Zigen FN01R-C 17x8 +43 Brembo 1. StopTech 1. 14.1" 4 pod Amistad 19" Rotino 19X8.5 +37 2. 13" 4 pot, FN01R-C 17x9 +35 (track), otherwise OEM rims 3. 13" ST-40, FN01R-C 17x8 +35 (3-4mm of clearance) 4. 13" ST-40, Stock Mitsu EVO 8 Enkei 17x8 +38 (plenty of clearance) 5. 18x8*OEM; 335x32 Slotted AeroRotors [F&R] [6-Pot ST-60 [F] & 4-Pot ST-45[R], (2-3mm clearance on rear is close, but works - 3-4mm front is Ok) 6. 18x9 SSR GT2-H (track) 335x32 Slotted AeroRotors [F&R] [6-Pot ST-60[F] & 4-Pot ST45[R] calipers (plenty of clearance F&R) Endless 1. Endless 6 pod 14.1" Amistad 19" Rotino 19X8.5 +37 Project Mu 1. Rotora 1. 6-pot 355mmx32mm Volk GT-7 19"x8.5" +23 high disk 2. 6-pot 355mmx32mm Junction Produce Scara Japan 19"x9.5" +23 high disk (needed 3mm spacer) Megan 1.14.25" / 6 piston with 18" Nismo's 18" Axis Reverbs, most Volk wheels, etc. Wilwood 1. 14.1" 6 piston Wilwood Stock 17" Sedan wheels 2. 13" x 1.37 rotors, SL-6 Wilwood, 17X8 5Zigen wheels 3. AZ Z Car kit, 13" 4-pot FSL, 5Zigen FNO1R-C 17x8 +43 Ksport 1. AP Racing (Stillen) 1.14.25" / 6 piston with 18" Nismo's 18" Axis Reverbs, most Volk wheels, etc. 2. Beware: '03 Coupe 18x8*OEM wheels; P/N AP3700 (front) 6-Pot w/14.25" rotors too tight to trust w/< 1mm -2mm! P/N AP3750 w/ 4-Pot is ok on rear. Stillen says should be OK on front, measure and decide 4 u-sef!
__________________
03 6MT Cpe Plat Metallic with mods for track use RIP-03 5AT Laser Red Cpe, doomed ZDayZ08 Last edited by FastrColor03; 01-02-2008 at 10:04 PM.
|
|
#26
01-15-2008, 11:11 PM
|
||||
|
||||
|
Added my front Wilwood 14" 6p BBK
Front Racing Brake 4-Pot 13" 1. Zenetti Five 20x8.5 +40 2. Sevas S-55 20x8.5 +40 (just clears) 3. 5-Zigen FN01R-C 17x8 +43 Brembo 1. StopTech 1. 14.1" 4 pod Amistad 19" Rotino 19X8.5 +37 2. 13" 4 pot, FN01R-C 17x9 +35 (track), otherwise OEM rims 3. 13" ST-40, FN01R-C 17x8 +35 (3-4mm of clearance) 4. 13" ST-40, Stock Mitsu EVO 8 Enkei 17x8 +38 (plenty of clearance) 5. 18x8*OEM; 335x32 Slotted AeroRotors [F&R] [6-Pot ST-60 [F] & 4-Pot ST-45[R], (2-3mm clearance on rear is close, but works - 3-4mm front is Ok) 6. 18x9 SSR GT2-H (track) 335x32 Slotted AeroRotors [F&R] [6-Pot ST-60[F] & 4-Pot ST45[R] calipers (plenty of clearance F&R) Endless 1. Endless 6 pod 14.1" Amistad 19" Rotino 19X8.5 +37 Project Mu 1. Rotora 1. 6-pot 355mmx32mm Volk GT-7 19"x8.5" +23 high disk 2. 6-pot 355mmx32mm Junction Produce Scara Japan 19"x9.5" +23 high disk (needed 3mm spacer) Megan 1.14.25" / 6 piston with 18" Nismo's 18" Axis Reverbs, most Volk wheels, etc. Wilwood 1. 14.1" 6 piston Wilwood Stock 17" Sedan wheels 2. 13" x 1.37 rotors, SL-6 Wilwood, 17X8 5Zigen wheels 3. AZ Z Car kit, 13" 4-pot FSL, 5Zigen FNO1R-C 17x8 +43 4. 14" x 1.25" Wilwood factory drilled & slotted rotors/ Wilwood SL6 Calipers (Red) with Rays Eng. Coupe 19s Ksport 1. AP Racing (Stillen) 1.14.25" / 6 piston with 18" Nismo's 18" Axis Reverbs, most Volk wheels, etc. 2. Beware: '03 Coupe 18x8*OEM wheels; P/N AP3700 (front) 6-Pot w/14.25" rotors too tight to trust w/< 1mm -2mm! P/N AP3750 w/ 4-Pot is ok on rear. Stillen says should be OK on front, measure and decide 4 u-sef! Rear Racing Brake OEM with 13" rotor 1. Zenetti Five 20x10 +43 2. Sevas S-55 20x10 +40 Brembo 1. StopTech 1. 13" 2-pot, FN01R-C 17x9 +35 (track), OEM otherwise 2. 4-pot 355mmx32mm Junction Produce Scara Japan 19"x10.5" +24 medium disk with step lip (does not fit without 10mm spacer!!!) 3. 13" 2-pot, iForged Essen 19x9.5 +45 and sometimes OEM sport 18's 4. 4-pot 355mmx32mm Anceltion SPSIX Revo 20"x10.5" +27 high disk Endless 1. Project Mu 1. Rotora 1. 4-pot 355mmx32mm Volk GT-7 19"x9.5" +24 standard disk 2. 4-pot 355mmx32mm Junction Produce Scara Japan 19"x10.5" +24 medium disk with step lip 3. 4-pot 380mm x 34mm Maya GR5 20x10.5 +29 4. 4-pot 355mm x 32mm iForged Aero 20x10 +42 (also Volk GT-C 20x9.5 +47) Megan 1. 13.5" 4 piston with 18" Nismo's 18" Axis Reverbs, most Volk wheels, etc. Wilwood 1. Ksport 1. AP Racing (Stillen) 1. 13.5" 4 piston with 18" Nismo's 18" Axis Reverbs, most Volk wheels, etc.
__________________
05 Lakeshore Slate Sedan 5AT Team RareJDM SxExCx - Stage4 Performance - rookie - RRYDE
Last edited by CandlestickPark; 01-15-2008 at 11:20 PM.
|
|
#27
01-16-2008, 06:43 PM
|
||||
|
||||
|
Added my BBK setup
Front Racing Brake 4-Pot 13" 1. Zenetti Five 20x8.5 +40 2. Sevas S-55 20x8.5 +40 (just clears) 3. 5-Zigen FN01R-C 17x8 +43 Brembo 1. StopTech 1. 14.1" 4 pod Amistad 19" Rotino 19X8.5 +37 2. 13" 4 pot, FN01R-C 17x9 +35 (track), otherwise OEM rims 3. 13" ST-40, FN01R-C 17x8 +35 (3-4mm of clearance) 4. 13" ST-40, Stock Mitsu EVO 8 Enkei 17x8 +38 (plenty of clearance) 5. 18x8*OEM; 335x32 Slotted AeroRotors [F&R] [6-Pot ST-60 [F] & 4-Pot ST-45[R], (2-3mm clearance on rear is close, but works - 3-4mm front is Ok) 6. 18x9 SSR GT2-H (track) 335x32 Slotted AeroRotors [F&R] [6-Pot ST-60[F] & 4-Pot ST45[R] calipers (plenty of clearance F&R) Endless 1. Endless 6 pod 14.1" Amistad 19" Rotino 19X8.5 +37 Project Mu 1. Rotora 1. 6-pot 355mmx32mm Volk GT-7 19"x8.5" +23 high disk 2. 6-pot 355mmx32mm Junction Produce Scara Japan 19"x9.5" +23 high disk (needed 3mm spacer) Megan 1.14.25" / 6 piston with 18" Nismo's 18" Axis Reverbs, most Volk wheels, etc. Wilwood 1. 14.1" 6 piston Wilwood Stock 17" Sedan wheels 2. 13" x 1.37 rotors, SL-6 Wilwood, 17X8 5Zigen wheels 3. AZ Z Car kit, 13" 4-pot FSL, 5Zigen FNO1R-C 17x8 +43 4. 14" x 1.25" Wilwood factory drilled & slotted rotors/ Wilwood SL6 Calipers (Red) with Rays Eng. Coupe 19s 5. 14" Wilwood factory drilled and sloted rotors with 6 piston SL6 calipers same as candlestickpark but in black. 18 inch Ray's Engineering 350Z track (18x8 +30 offset) Ksport 1. AP Racing (Stillen) 1.14.25" / 6 piston with 18" Nismo's 18" Axis Reverbs, most Volk wheels, etc. 2. Beware: '03 Coupe 18x8*OEM wheels; P/N AP3700 (front) 6-Pot w/14.25" rotors too tight to trust w/< 1mm -2mm! P/N AP3750 w/ 4-Pot is ok on rear. Stillen says should be OK on front, measure and decide 4 u-sef! Rear Racing Brake OEM with 13" rotor 1. Zenetti Five 20x10 +43 2. Sevas S-55 20x10 +40 Brembo 1. StopTech 1. 13" 2-pot, FN01R-C 17x9 +35 (track), OEM otherwise 2. 4-pot 355mmx32mm Junction Produce Scara Japan 19"x10.5" +24 medium disk with step lip (does not fit without 10mm spacer!!!) 3. 13" 2-pot, iForged Essen 19x9.5 +45 and sometimes OEM sport 18's 4. 4-pot 355mmx32mm Anceltion SPSIX Revo 20"x10.5" +27 high disk Endless 1. Project Mu 1. Rotora 1. 4-pot 355mmx32mm Volk GT-7 19"x9.5" +24 standard disk 2. 4-pot 355mmx32mm Junction Produce Scara Japan 19"x10.5" +24 medium disk with step lip 3. 4-pot 380mm x 34mm Maya GR5 20x10.5 +29 4. 4-pot 355mm x 32mm iForged Aero 20x10 +42 (also Volk GT-C 20x9.5 +47) Megan 1. 13.5" 4 piston with 18" Nismo's 18" Axis Reverbs, most Volk wheels, etc. Wilwood 1. 13" 4 piston Wilwood factory kit with 18" Ray's Engineering 350Z Track 18's (18x8.5 +33 offset) Ksport 1. AP Racing (Stillen) 1. 13.5" 4 piston with 18" Nismo's 18" Axis Reverbs, most Volk wheels, etc.
__________________
\( ' _ ' )/ . : s h y n e S E D A N : . \( ' _ ' )/
Vice President of the Supervisor to the Distributor of Tireshine at Local Meets. "Real men set importance not on the value of their riches, but on the richness of their values." -G SEDAN
|
|
#28
01-20-2008, 01:36 AM
|
|||
|
|||
|
FRONT
Racing Brake 4-Pot 13" 1. Zenetti Five 20x8.5 +40 2. Sevas S-55 20x8.5 +40 (just clears) 3. 5-Zigen FN01R-C 17x8 +43 Brembo 1. StopTech 1. 14.1" 4 pod Amistad 19" Rotino 19X8.5 +37 2. 13" 4 pot, FN01R-C 17x9 +35 (track), otherwise OEM rims 3. 13" ST-40, FN01R-C 17x8 +35 (3-4mm of clearance) 4. 13" ST-40, Stock Mitsu EVO 8 Enkei 17x8 +38 (plenty of clearance) 5. 18x8*OEM; 335x32 Slotted AeroRotors [F&R] [6-Pot ST-60 [F] & 4-Pot ST-45[R], (2-3mm clearance on rear is close, but works - 3-4mm front is Ok) 6. 18x9 SSR GT2-H (track) 335x32 Slotted AeroRotors [F&R] [6-Pot ST-60[F] & 4-Pot ST45[R] calipers (plenty of clearance F&R) Endless 1. Endless 6 pod 14.1" Amistad 19" Rotino 19X8.5 +37 Project Mu 1. Rotora 1. 6-pot 355mmx32mm Volk GT-7 19"x8.5" +23 high disk 2. 6-pot 355mmx32mm Junction Produce Scara Japan 19"x9.5" +23 high disk (needed 3mm spacer) 3. 6-pot 355mmx32mm Volk SF-Challenge 19x9.5 +28 Megan 1.14.25" / 6 piston with 18" Nismo's 18" Axis Reverbs, most Volk wheels, etc. Wilwood 1. 14.1" 6 piston Wilwood Stock 17" Sedan wheels 2. 13" x 1.37 rotors, SL-6 Wilwood, 17X8 5Zigen wheels 3. AZ Z Car kit, 13" 4-pot FSL, 5Zigen FNO1R-C 17x8 +43 4. 14" x 1.25" Wilwood factory drilled & slotted rotors/ Wilwood SL6 Calipers (Red) with Rays Eng. Coupe 19s 5. 14" Wilwood factory drilled and sloted rotors with 6 piston SL6 calipers same as candlestickpark but in black. 18 inch Ray's Engineering 350Z track (18x8 +30 offset) Ksport 1. AP Racing (Stillen) 1.14.25" / 6 piston with 18" Nismo's 18" Axis Reverbs, most Volk wheels, etc. 2. Beware: '03 Coupe 18x8*OEM wheels; P/N AP3700 (front) 6-Pot w/14.25" rotors too tight to trust w/< 1mm -2mm! P/N AP3750 w/ 4-Pot is ok on rear. Stillen says should be OK on front, measure and decide 4 u-sef! REAR: Racing Brake OEM with 13" rotor 1. Zenetti Five 20x10 +43 2. Sevas S-55 20x10 +40 Brembo 1. StopTech 1. 13" 2-pot, FN01R-C 17x9 +35 (track), OEM otherwise 2. 4-pot 355mmx32mm Junction Produce Scara Japan 19"x10.5" +24 medium disk with step lip (does not fit without 10mm spacer!!!) 3. 13" 2-pot, iForged Essen 19x9.5 +45 and sometimes OEM sport 18's 4. 4-pot 355mmx32mm Anceltion SPSIX Revo 20"x10.5" +27 high disk Endless 1. Project Mu 1. Rotora 1. 4-pot 355mmx32mm Volk GT-7 19"x9.5" +24 standard disk 2. 4-pot 355mmx32mm Junction Produce Scara Japan 19"x10.5" +24 medium disk with step lip 3. 4-pot 380mm x 34mm Maya GR5 20x10.5 +29 4. 4-pot 355mm x 32mm iForged Aero 20x10 +42 (also Volk GT-C 20x9.5 +47) 5. 4-pot 355mm x 32mm Volk SF-Challenge 19x10.5 +23 Megan 1. 13.5" 4 piston with 18" Nismo's 18" Axis Reverbs, most Volk wheels, etc. Wilwood 1. 13" 4 piston Wilwood factory kit with 18" Ray's Engineering 350Z Track 18's (18x8.5 +33 offset) Ksport 1. AP Racing (Stillen) 1. 13.5" 4 piston with 18" Nismo's 18" Axis Reverbs, most Volk wheels, etc.
__________________
'06 G35 Coupe| 6MT| IP| Premium| Aero| Nav| XM| OEM Mudguards| Z-Tube| K&N Filter| 350Z Tein H-Techs| Volk SF Challenges| Rotora 355mm 6 pot/4 pot BBK | XPEL Clear Bra| Clear Corners| 20% Tint| Gialla Grill| Infinity Kappas| JL 500/1| JL 10W6v2| JL Bass Control| 4080 Box| Damplifier
|
|
#29
02-23-2008, 02:09 AM
|
||||
|
||||
|
FRONT
Racing Brake 4-Pot 13" 1. Zenetti Five 20x8.5 +40 2. Sevas S-55 20x8.5 +40 (just clears) 3. 5-Zigen FN01R-C 17x8 +43 Brembo 1. StopTech 1. 14.1" 4 pod Amistad 19" Rotino 19X8.5 +37 2. 13" 4 pot, FN01R-C 17x9 +35 (track), otherwise OEM rims 3. 13" ST-40, FN01R-C 17x8 +35 (3-4mm of clearance) 4. 13" ST-40, Stock Mitsu EVO 8 Enkei 17x8 +38 (plenty of clearance) 5. 18x8*OEM; 335x32 Slotted AeroRotors [F&R] [6-Pot ST-60 [F] & 4-Pot ST-45[R], (2-3mm clearance on rear is close, but works - 3-4mm front is Ok) 6. 18x9 SSR GT2-H (track) 335x32 Slotted AeroRotors [F&R] [6-Pot ST-60[F] & 4-Pot ST45[R] calipers (plenty of clearance F&R) Endless 1. Endless 6 pod 14.1" Amistad 19" Rotino 19X8.5 +37 Project Mu 1. Rotora 1. 6-pot 355mmx32mm Volk GT-7 19"x8.5" +23 high disk 2. 6-pot 355mmx32mm Junction Produce Scara Japan 19"x9.5" +23 high disk (needed 3mm spacer) 3. 6-pot 355mmx32mm Volk SF-Challenge 19x9.5 +28 4. 12-pot 380mmx34mm iForged Aero 20x8.5 +40 (sedan) Megan 1.14.25" / 6 piston with 18" Nismo's 18" Axis Reverbs, most Volk wheels, etc. Wilwood 1. 14.1" 6 piston Wilwood Stock 17" Sedan wheels 2. 13" x 1.37 rotors, SL-6 Wilwood, 17X8 5Zigen wheels 3. AZ Z Car kit, 13" 4-pot FSL, 5Zigen FNO1R-C 17x8 +43 4. 14" x 1.25" Wilwood factory drilled & slotted rotors/ Wilwood SL6 Calipers (Red) with Rays Eng. Coupe 19s 5. 14" Wilwood factory drilled and sloted rotors with 6 piston SL6 calipers same as candlestickpark but in black. 18 inch Ray's Engineering 350Z track (18x8 +30 offset) Ksport 1. AP Racing (Stillen) 1.14.25" / 6 piston with 18" Nismo's 18" Axis Reverbs, most Volk wheels, etc. 2. Beware: '03 Coupe 18x8*OEM wheels; P/N AP3700 (front) 6-Pot w/14.25" rotors too tight to trust w/< 1mm -2mm! P/N AP3750 w/ 4-Pot is ok on rear. Stillen says should be OK on front, measure and decide 4 u-sef! REAR: Racing Brake OEM with 13" rotor 1. Zenetti Five 20x10 +43 2. Sevas S-55 20x10 +40 Brembo 1. StopTech 1. 13" 2-pot, FN01R-C 17x9 +35 (track), OEM otherwise 2. 4-pot 355mmx32mm Junction Produce Scara Japan 19"x10.5" +24 medium disk with step lip (does not fit without 10mm spacer!!!) 3. 13" 2-pot, iForged Essen 19x9.5 +45 and sometimes OEM sport 18's 4. 4-pot 355mmx32mm Anceltion SPSIX Revo 20"x10.5" +27 high disk Endless 1. Project Mu 1. Rotora 1. 4-pot 355mmx32mm Volk GT-7 19"x9.5" +24 standard disk 2. 4-pot 355mmx32mm Junction Produce Scara Japan 19"x10.5" +24 medium disk with step lip 3. 4-pot 380mm x 34mm Maya GR5 20x10.5 +29 4. 4-pot 355mm x 32mm iForged Aero 20x10 +42 (also Volk GT-C 20x9.5 +47) 5. 4-pot 355mm x 32mm Volk SF-Challenge 19x10.5 +23 6. 4-pot 355mm x 32mm iForged Aero 20x10 +42 (sedan) Megan 1. 13.5" 4 piston with 18" Nismo's 18" Axis Reverbs, most Volk wheels, etc. Wilwood 1. 13" 4 piston Wilwood factory kit with 18" Ray's Engineering 350Z Track 18's (18x8.5 +33 offset) Ksport 1. AP Racing (Stillen) 1. 13.5" 4 piston with 18" Nismo's 18" Axis Reverbs, most Volk wheels, etc
__________________
ONE FUN SEDAN!! MY CAR (LINK) Detailed Image | Greddy Twin Turbo & Built Motor by UMS Tuning = 649whp/651wtq | Rotora (12/4pot) | IForged | Quad Projector Retro | 1-off Dual 3", Dual Muffler Turbo-back Exhaust by Nichols AutoFab | NITTO | SPARCO |
|
|
#30
03-03-2008, 02:36 AM
|
|||
|
|||
|
FRONT
Racing Brake 4-Pot 13" 1. Zenetti Five 20x8.5 +40 2. Sevas S-55 20x8.5 +40 (just clears) 3. 5-Zigen FN01R-C 17x8 +43 Brembo 1. StopTech 1. 14.1" 4 pod Amistad 19" Rotino 19X8.5 +37 2. 13" 4 pot, FN01R-C 17x9 +35 (track), otherwise OEM rims 3. 13" ST-40, FN01R-C 17x8 +35 (3-4mm of clearance) 4. 13" ST-40, Stock Mitsu EVO 8 Enkei 17x8 +38 (plenty of clearance) 5. 18x8*OEM; 335x32 Slotted AeroRotors [F&R] [6-Pot ST-60 [F] & 4-Pot ST-45[R], (2-3mm clearance on rear is close, but works - 3-4mm front is Ok) 6. 18x9 SSR GT2-H (track) 335x32 Slotted AeroRotors [F&R] [6-Pot ST-60[F] & 4-Pot ST45[R] calipers (plenty of clearance F&R) Endless 1. Endless 6 pod 14.1" Amistad 19" Rotino 19X8.5 +37 Project Mu 1. Rotora 1. 6-pot 355mmx32mm Volk GT-7 19"x8.5" +23 high disk 2. 6-pot 355mmx32mm Junction Produce Scara Japan 19"x9.5" +23 high disk (needed 3mm spacer) 3. 6-pot 355mmx32mm Volk SF-Challenge 19x9.5 +28 4. 12-pot 380mmx34mm iForged Aero 20x8.5 +40 (sedan) 5.12 pot 380 mm HRE 944 20x9.5 Megan 1.14.25" / 6 piston with 18" Nismo's 18" Axis Reverbs, most Volk wheels, etc. Wilwood 1. 14.1" 6 piston Wilwood Stock 17" Sedan wheels 2. 13" x 1.37 rotors, SL-6 Wilwood, 17X8 5Zigen wheels 3. AZ Z Car kit, 13" 4-pot FSL, 5Zigen FNO1R-C 17x8 +43 4. 14" x 1.25" Wilwood factory drilled & slotted rotors/ Wilwood SL6 Calipers (Red) with Rays Eng. Coupe 19s 5. 14" Wilwood factory drilled and sloted rotors with 6 piston SL6 calipers same as candlestickpark but in black. 18 inch Ray's Engineering 350Z track (18x8 +30 offset) Ksport 1. AP Racing (Stillen) 1.14.25" / 6 piston with 18" Nismo's 18" Axis Reverbs, most Volk wheels, etc. 2. Beware: '03 Coupe 18x8*OEM wheels; P/N AP3700 (front) 6-Pot w/14.25" rotors too tight to trust w/< 1mm -2mm! P/N AP3750 w/ 4-Pot is ok on rear. Stillen says should be OK on front, measure and decide 4 u-sef! REAR: Racing Brake OEM with 13" rotor 1. Zenetti Five 20x10 +43 2. Sevas S-55 20x10 +40 Brembo 1. StopTech 1. 13" 2-pot, FN01R-C 17x9 +35 (track), OEM otherwise 2. 4-pot 355mmx32mm Junction Produce Scara Japan 19"x10.5" +24 medium disk with step lip (does not fit without 10mm spacer!!!) 3. 13" 2-pot, iForged Essen 19x9.5 +45 and sometimes OEM sport 18's 4. 4-pot 355mmx32mm Anceltion SPSIX Revo 20"x10.5" +27 high disk Endless 1. Project Mu 1. Rotora 1. 4-pot 355mmx32mm Volk GT-7 19"x9.5" +24 standard disk 2. 4-pot 355mmx32mm Junction Produce Scara Japan 19"x10.5" +24 medium disk with step lip 3. 4-pot 380mm x 34mm Maya GR5 20x10.5 +29 4. 4-pot 355mm x 32mm iForged Aero 20x10 +42 (also Volk GT-C 20x9.5 +47) 5. 4-pot 355mm x 32mm Volk SF-Challenge 19x10.5 +23 6. 4-pot 355mm x 32mm iForged Aero 20x10 +42 (sedan) 7. 4 pot 380 mm HRE 944 20x11 (might change to 20x10.5) G37 Megan 1. 13.5" 4 piston with 18" Nismo's 18" Axis Reverbs, most Volk wheels, etc. Wilwood 1. 13" 4 piston Wilwood factory kit with 18" Ray's Engineering 350Z Track 18's (18x8.5 +33 offset) Ksport 1. AP Racing (Stillen) 1. 13.5" 4 piston with 18" Nismo's 18" Axis Reverbs, most Volk wheels, etc
__________________
Back to stock!
|
|
| Tags |
| 12, 18, 20, ap, brakes, clearance, essen, g37, gr5, greddy, iforged, junction, maya, pot, produce, racing, rotora |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Linear Mode
