|
|
|
|
|||||||
|
|
 |
|
|
Thread Tools | Search this Thread | Rate Thread | Display Modes |
|
#1
08-24-2008, 03:44 PM
|
|||
|
|||
|
Help: Using the radiator funnel to bleed air
So I'm just got the radiator funnel to bleed the air out of my radiator, but none of the attachments fit snug. Is this how it is supposed to fit? I'm just afraid its going to spill out. because its a bit loose.
__________________
JDM Brown G35c 6mt/Drilled Holes in my exhaust/Cut my springs/AC duct Intake/Dremeled lines in my rotors/Paper air filter/ebay clutch/AC delco/Raybestos/BONDO/Duct Tape/Electrical tape/Aluminum foil/Song playing in car- http://www.youtube.com/watch?v=ArSVUUiLGZ0 
|
|
#2
08-25-2008, 11:48 AM
|
|||
|
|||
|
Thanks to Rookie- everything worked fine. Looks like a few people looked into the thread, so basically he told me to use the bushing from a larger adapter and put it on the top side of the correct adapter between the adapter and radiator cap attachment, fit nice and snug and had no spills.
__________________
JDM Brown G35c 6mt/Drilled Holes in my exhaust/Cut my springs/AC duct Intake/Dremeled lines in my rotors/Paper air filter/ebay clutch/AC delco/Raybestos/BONDO/Duct Tape/Electrical tape/Aluminum foil/Song playing in car- http://www.youtube.com/watch?v=ArSVUUiLGZ0
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
