Brand New KINETIX With Free Shipping to Continental U.S.!

[Mike@CZP]

Hey guys have a shipment of Kinetix products coming in soon, wanted to offer the first batch to My350z.com and G35driver.com members first. Happy shopping!

Please click on the "add-to-cart" icons below to order. Please put "g35driver.com member" in the comments section to receive the discount for free shipping. Thanks!


Kinetix Racing V+ Plenum 350Z/G35 : $250.99 Shipped!!



Improved in EVERY aspect over our previous intake plenum, including performance:

* 270% stronger than previous plenum

* Incredible heat resistance, improved 170%, now up to 500 degrees F

* Lower operating temperatures - 50 degrees cooler than ANY aluminum plenum option

* More volume! 20% more volume than factory and 12% more than our previous version

* Completely smooth underside with NO flow restrictions

* Can handle boosted cars, with lifetime warranty on cars up to 15 psi

* Lifetime Warranty

* Check out our upcoming "Upgrade Program" for our previous plenum customers!

This new intake plenum replaces the upper half of your factory intake manifold. This plenum bolts directly up to your car with zero modifications, and also allows the use of the factory strut bar, and engine cover. This unit will fit the 350z, the G35, and the FX.

This plenum increases the volume to the middle and more importantly the front cylinders. The factory plenum utilizes a very aggressive angle as it caps off the front cylinders. This new plenum equalizes the flow to all cylinders, while also increasing the total plenum volume. This plenum also uses a very versatile plastic to achieve a smooth interior for superior flow properties. The plastic also allows a lighter overall weight, by about 3 lbs. The overall temperatures of the plenum have also decreased by about 50 degrees farenheit. This helps with heat soak problems and to help lower air intake temperatures.

Our plenum has shown a solid peak gain of 14 rwhp and a consistent gain throughout the RPM range. When matched up with our high flow cats, they together have shown peak gains of 20 rwhp.

The plenum still retains all factory mounting points and also includes all necessary new hardware. The plenum also includes a permanently adhered flange gasket that is to be used with the factory gasket as well as a new throttle body gasket.

** This plenum includes a lifetime warranty on manufacturer's defects. This will include any failure in the material used which may effect its ability to create a seal. We will also offer a new gasket service for a minor fee to replace any gaskets that have been damaged during installation or repetitive installations.

Kinetix Racing 350Z/G35 SSV Extreme Flow Kinetix Manifold : $730.99 Shipped!




Works great in both NA (naturally aspirated) and FI (supercharged or turbocharged) applications. Expect to see a much smoother and stronger power curve, and expect your car to scream past 6000 rpm.

This manifold is constructed entirely of Stainless Steel, then polished out for an absolute beautiful finished product that looks as great as it performs. We chose stainless because of its great thermal properties, conducting 10X!! less heat than aluminum and eliminating much of the manifold's mass, which greatly helps with heat soak. Stainless is definately more expensive than aluminum, but the finish shines brighter and definitely longer. The overall manifold SAVES 10lbs of weight over stock! Precision TIG welding throughout, and a CNC cut 3/8" main flange. All mandrel bent runners and charge tube, this manifold rivals the quality of manifolds twice its price.

We improved greatly upon the factory plenum designs. The factory lower plenum creates MANY dips and turns which do not promote good airflow and create turbulence inside your factory intake. We developed a straight shot design, eliminating the twists, turns, and obstructions. We then took each runner and also added velocity stack inlets to each individual runner for even better performance . . . thus the name S.S.V. = Stainless Steel Velocity.

This Manifold is a DIRECT replacement and will work with any aftermarket intake. It also allows you the ability to use the factory strut bar, or any aftermarket strut bar. There is an engine cover which will be sold seperately which will be available soon.

We recommend an A/F tuning on Forced Induction vehicles (turbo and supercharged) after installation of the SSV in order to maximize power and overall engine reliability. Tuning is generally not needed in Naturally Aspirated ( NA ) applications.

Each manifold is supplied with all necessary hardware and instructions. There is an additional port supplied which can be used for boost gauges, etc.

Kinetix Racing 350Z/G35 Test Pipes : $220.99 Shipped!!! ($370.99 w/ In Line Resonator)



These pipes completely remove your factory catalytic converters and relplaces them with a straight through design. This provides the absolute most flow possible which has shown gains on NA 350zs between 4-8HP making it one of the best "bang for the buck" mods. These pipes are an abosulte must on FI cars which need all the flow possible.

Constructed entirely of stainless steel and feature thick 3/8" flanges. They are completely TIG welded and also feature seamless mandrel bends. Tube diameter of 2.25" matches up perfectly with aftermarket exhausts like Borla, Injen, and Nismo. They retain the factory oxygen sensor mount and WILL NOT THROW A CHECK ENGINE LIGHT when run.

These pipes will definately make your exhaust note more aggressive. They have also tended to add a "raspy" exhaust note through the 3-4k range. This note has been loved by some, and hated by others, so it is not for the conservative. They use all factory mounting points and there is no modification to the vehicle. These will work with either aftermarket headers, factory headers, aftermarket exhaust, or factory exhaust.

Kinetix High Flow SMOG Legal Catalytic Converters 350z/ G35 : $400.99 Shipped!!!

Complete set! High flow catalytic converters that will pass emissions testing for 350Z and G35 (2dr and 4 dr)

*New and Improved with more installation clearance and long term strength !

The factory catalytic converters are well known as the biggest "choke point" in the factory exhaust system. These high flow CARSOUND/MAGNAFLOW catalytic converters blow away the stock converter flow rates while still maintaining legal emissions levels.

Constructed with stainless tubing and 3/8" stainless flanges (converters are aluminized steel). Fully TIG welded and true mandrel bends used throughout. The CARSOUND converters are widely known as some of the best and are also marketed under the MAGNAFLOW brand name. These converters will bolt up to any header (factory or aftermarket) and any exhaust (factory or aftermarket). These pipes also retain the factory Oxygen sensor location and WILL NOT THROW A CHECK ENGINE LIGHT!!.

Expect great performance gains from these converters as they have dyno'd between 5-8 hp at the wheels on factory 350Z's. They only add a slightly more aggressive exhaust note and do not have the pesky "raspiness" between 3-4k rpm that is seen with straight through test pipes.

All of our pipes come complete with bolts, washers, and lock nuts.

[Mike@CZP]

bump!!

[Mike@CZP]

pm me for fast response

[Mike@CZP]

bump

[Mike@CZP]

bump

[Mike@CZP]

bump

[Mike@CZP]

bump

[Mike@CZP]

bump

[Mike@CZP]

bump

[Mike@CZP]

bump

[Mike@CZP]

bump

[Mike@CZP]

bump

[Mike@CZP]

bump

[Mike@CZP]

bump

[Mike@CZP]

Bump