Asking $100 shipped to lower 48 states
Intake will include couplers and polished clamps you see in the pic
I had this installed with my NWP Big Bore throttle body so the coupler on the throttle body side is meant for the 75mm opening. You'll need a reducing coupler like the one on the other end of the intake if you wish to run it with an OEM throttle body.
It has a couple of small nicks. I can provide additional pictures if desired.
No filter is included. This intake sits between your throttle body and MAF housing, same as OEM.
There is NO
vacuum port on it as well on the backside. Also included, is the filter/breather for the back of your drivers side valve cover (see 1st pic below) where normally a vacuum/breather hose would come out and connect to the oem intake.
PM if interested