★ FID INJECTORS - BOSCH EV14 Injectors!! 2000cc Injectors @ $799 SHIPPED! ★
#1
★ FID INJECTORS - BOSCH EV14 Injectors!! 2000cc Injectors @ $799 SHIPPED! ★
AVAILABLE EXCLUSIVELY @ THMotorsports !!!
PRICING BREAK DOWN:
630cc = $350 SHIPPED
750cc = PM for DETAILS!
850cc = PM for DETAILS!
1000cc = PM for DETAILS!
1200cc = PM for DETAILS!
2000cc = $799 SHIPPED
We will be MATCHING and BEATING all competitors quotes from other brand injectors!
PM Me for Details!
#6
#7
These are not the same as DW as they use a different injector not from Bosch to get their results. But yes, with a top feed fuel rail, this is PnP, along with the pigtail. You can do 11mm or 14mm. Take your pick.
Trending Topics
#8
I currently have CJM rails with fuel dampens and stage 3 Return and DW1000 IV14 that are maxed out with E85 @ 500 rwhp 15psi, are the 2000cc the next stage or will another set suffice, i have seen 1400 more expensive than these 2000cc so i dont want to step down in quality just for higher flow. As for height which one is same height as the DW1000 ?
thanks
#9
When you say FID INJECTORS - BOSCH EV14 Injectors!! 2000cc - the 2000cc are not actually Bosch EV14 ? what are they ?
I currently have CJM rails with fuel dampens and stage 3 Return and DW1000 IV14 that are maxed out with E85 @ 500 rwhp 15psi, are the 2000cc the next stage or will another set suffice, i have seen 1400 more expensive than these 2000cc so i dont want to step down in quality just for higher flow. As for height which one is same height as the DW1000 ?
thanks
I currently have CJM rails with fuel dampens and stage 3 Return and DW1000 IV14 that are maxed out with E85 @ 500 rwhp 15psi, are the 2000cc the next stage or will another set suffice, i have seen 1400 more expensive than these 2000cc so i dont want to step down in quality just for higher flow. As for height which one is same height as the DW1000 ?
thanks
False. These are ALL BOSCH injectors. FID simply takes them, matches them per car, test them on an injector dyno by hand and then provides every customer with a fuel dyno charts with their specific results for the injectors they purchased in the box.
We can calculate the fuel you would need for your horsepower goals. We regularly have customers use the 2000cc injectors in R35 GTR's and Supra's without failure. We just sold like 24 sets to another vendor cost it's WAY MORE cost efficient than ID or FIC and does the same thing if not better. My personal car idles at 900rpm with 2000cc injectors from FID.
Yes, the same height and I can do 11mm or 14mm, which ever your rail prefers. PM me more information on your car and I'll get you a solid deal if you do a review for us. That way EVERYONE can know your good results!
Thread
Thread Starter
Forum
Replies
Last Post