Need your help!wheel spacers!

[iseechriss]

ok , so i ordered spacers for my wheels, and they finally arrived yesterday i currently have the OEM 19 rays, and as i was bolting on the lugs, i noticed that the screws that hold it together arent long enough!! so im guessing i have to buy new bolts, but i think its going to be a bit** since i have to take off my disk brakes, anyone have any suggestions? where can i buy them? I am in desperate need of wheel spacers so i gotta get this done, they are 15mm,(1/2) inch, here are a couple of pics of the spacer, and how my car looks and how i want it too look.


my car.


how i want it too look.NOT MY CAR.

[eurodre]

usually these spacers come with extended studs from what i know, contact the person you got the spacers from and tell them about the extended studs

[seymore4]

...I never had to remove my disc brakes to install my spacers

Those spacers don't look right. They should have come with extended studs and stuff so you just bolt them on between the wheel and the disc brakes.

[EncoreCestMoi]

should have got these:

http://cgi.ebay.com/ebaymotors/20MM-...fAccessor ies

they bolt right on. no need to press in longer studs

[eurodre]

Originally Posted by EncoreCestMoi

should have got these:

http://cgi.ebay.com/ebaymotors/20MM-...fAccessor ies

they bolt right on. no need to press in longer studs

uhm those are 20mm he said he has/needed 15mm

Originally Posted by iseechriss

desperate need of wheel spacers so i gotta get this done, they are 15mm,(1/2) inch,

[seymore4]

I've got a pair of 15mm Project Kics hubcentric spacers I'll sell you if you give up on those

[EncoreCestMoi]

Originally Posted by eurodre

uhm those are 20mm he said he has/needed 15mm

They come in other sizes. Besides, 15's are probably not going to give the look he is going for with the pic he posted

[iseechriss]

Do they come with everything I need? Where are you located?

Originally Posted by seymore4

I've got a pair of 15mm Project Kics hubcentric spacers I'll sell you if you give up on those

[Dranom]

yeah you need extended studs for those DO NOT bolt it up with the stock studs or else your wheels will fall off!

you can get ichiba or project kics spacers with built in studs and hub rings
if you have OEM 19's the guys here usually put 20mm i believe

[b2autodesigns]

Here is a link to the Ichiba spacers:

B2Autodesigns: Ichiba Spacer kits 5mm-25mm

Charles

[seymore4]

Originally Posted by iseechriss

Do they come with everything I need? Where are you located?

Yup. Just bolt em on and go! I'm in Portland OR.
Here's a link-
http://www.evasivemotorsports.com/me...Wheel_ Spacer