G35 Coupe V35 2003 - 07 Discussion about the 1st Generation V35 G35 Coupe

Grinding Issue

  #1  
Old 05-02-2016, 03:18 PM
Motofreak1210's Avatar
Registered User
Thread Starter
Join Date: May 2016
Posts: 2
Received 0 Likes on 0 Posts
Exclamation Grinding Issue

I've owned my G35 coupe for about 4 months now it has a little over 100,000 miles on the car, recently I noticed a grinding noise when starting the car and when I first give it gas it grinds as well and along with that a noticeable throttle lag, anyone have any ideas what this could be?!!
 
  #2  
Old 05-02-2016, 05:09 PM
InsanePacman's Avatar
Registered User
Join Date: Apr 2014
Location: An Igloo with my G35
Posts: 7
Received 1 Like on 1 Post
That is likely a timing issue, could have a broken slack guide or chain guide.
 
The following users liked this post:
Motofreak1210 (05-03-2016)
  #3  
Old 05-03-2016, 05:30 PM
Motofreak1210's Avatar
Registered User
Thread Starter
Join Date: May 2016
Posts: 2
Received 0 Likes on 0 Posts
That's what I was thinking as well, what kind of money would that cost, I would assume a whole new timing chain would be needed
 
  #4  
Old 05-03-2016, 06:52 PM
coffeysm's Avatar
Registered User
iTrader: (1)
Join Date: Jun 2006
Location: West Chester, PA
Posts: 1,382
Received 167 Likes on 147 Posts
If you have an 06 or below you can take off the black covers to see how much slack there is and if the plunger is all the way extended.

I did a primary chain replacement myself on my car and it was about 500 bucks in parts (water pump, chain, guides, o-rings, guide rails, etc..)

Nissan quoted me about 1200 bucks in labor to do it alone, since they were going off AllData.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jbmw002
G35 Sedan V35 2003-06
6
11-28-2016 10:57 AM
BigStun
G35 Sedan V36 2007- 08
1
03-01-2016 11:47 AM
SS G35
Engine, Drivetrain & Forced-Induction
1
02-29-2016 06:23 PM
Jiggs1219
G35 Sedan V36 2007- 08
6
02-25-2016 08:30 AM
Bean_VQ35DE
Engine, Drivetrain & Forced-Induction
0
02-19-2016 08:44 PM


Thread Tools
Search this Thread
Rate This Thread
Rate This Thread:
You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: Grinding Issue



All times are GMT -4. The time now is 08:06 PM.