2004 G35 Sedan AWD Agressive Wheel/Tire Specs.
#19
ok guys.. so i went to test fit my wheels today and my first thought was that it wasnt going to be able to drive it at all due to offsets, but it fits.... i dont believe the offsets are as posted..... i mean i wouldnt know, but the way the wheels sit as is on my car with no adjustments seems almost the same as +35?? any one want to take a shot at these offsets??? and i already ordered 15mm spacers for the front too... =( lol i may still need it bc i still NEED TO ADJUST RIDE HEIGHT AND CAMBER!!! but i really doubt i will need them...
The following 3 users liked this post by MPG35fiend:
#20
The following users liked this post:
MPG35fiend (09-11-2012)
#21
The following users liked this post:
MPG35fiend (09-11-2012)
The following users liked this post:
MPG35fiend (09-11-2012)
#23
Thanks guys! I appreciate all the support!
Yea no spacers and my camber as of now is -1.2 Front and -2.0 rear. So I'm thinking dropping it 3/4" in th rear and cambering the front -2 or 2.5 and the rears -3 or 3.5. I' won't know until I adjust my ride height bc cambering them alone will lower my car up front... I will definitely post updates...
I was also thinking that I could run meaty tires.
Yea no spacers and my camber as of now is -1.2 Front and -2.0 rear. So I'm thinking dropping it 3/4" in th rear and cambering the front -2 or 2.5 and the rears -3 or 3.5. I' won't know until I adjust my ride height bc cambering them alone will lower my car up front... I will definitely post updates...
I was also thinking that I could run meaty tires.
#24
#25
The following users liked this post:
MPG35fiend (09-12-2012)
#28
Keep in mind my offsets are unknown, but I think is pretty close to +17 rear +22 front. I may need a 5 or 10mm up front after adjustments... It's been a hell of a time researching specs for the AWD, so I'll be making a progression thread sometime after its complete. Will be posting possible set ups that would work as well for all the other G35x's out there to make the research easier..
The following users liked this post:
Canadiotica (09-16-2012)
#29
Keep in mind my offsets are unknown, but I think is pretty close to +17 rear +22 front. I may need a 5 or 10mm up front after adjustments... It's been a hell of a time researching specs for the AWD, so I'll be making a progression thread sometime after its complete. Will be posting possible set ups that would work as well for all the other G35x's out there to make the research easier..
I think the lowest I can go on my 05 X is about 25" all around because that is what I am driving now. So during the winter I am going to try to pick up a wheel setup that will fit well at that height with spc camber kits front and rear and rolled rear fenders and removed front clips.
Hoping to end up with a bit of rim poke like you! Don't mind mild stretches.
The following users liked this post:
MPG35fiend (09-16-2012)
#30
thanks! if you have the same wheel/tire specs youll most definitely have the same look... i will post as soon as i get a chance to finally adjust stance..
been busy doing this...... still have rare jdm cover to install and some cleaning/deleting to do before i get some pictures.... then ill do my height adjustment after. lol.
been busy doing this...... still have rare jdm cover to install and some cleaning/deleting to do before i get some pictures.... then ill do my height adjustment after. lol.