Trunk open indicator
#1
#3
There is a "TRUNK RELEASE POWER CANCEL SWITCH" located in the glove box. (ref: Owners Manual page 3-19 or so) Perhaps it got unplugged and is causing the problem. It's the most obvious thing I can think of that would correlate the glove box with trunk functions. I always look for the easy stuff first.
.02
.02
#4
Does the trunk open switch (by the VDC button) still work?
If not you might have knocked off the connector for that switch - which is inside the glove box.
Not sure if that would cause the light to stop working but it's the only switch that relates to the trunk in that particular area.
If not you might have knocked off the connector for that switch - which is inside the glove box.
Not sure if that would cause the light to stop working but it's the only switch that relates to the trunk in that particular area.
#5
There is a "TRUNK RELEASE POWER CANCEL SWITCH" located in the glove box. (ref: Owners Manual page 3-19 or so) Perhaps it got unplugged and is causing the problem. It's the most obvious thing I can think of that would correlate the glove box with trunk functions. I always look for the easy stuff first.
.02
.02
#6
I agree though, it doesn't seem like it should. It's just so strongly suggested as a likely suspect from a purely troubleshooting step, since it does have a related function AND it was possibly disturbed by the work you last did before it quit working.
Last edited by vqsmile; 09-12-2016 at 11:37 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Magnum8
G35 Sedan V35 2003-06
2
08-20-2016 01:03 PM