Rear brembo brake caliper to stock caliper
#1
#2
Join Date: May 2017
Location: Washington State
Posts: 14,792
Received 2,456 Likes
on
2,150 Posts
Coupe 6MT Premium RAS
#5
Join Date: May 2017
Location: Washington State
Posts: 14,792
Received 2,456 Likes
on
2,150 Posts
Coupe 6MT Premium RAS
You will need calipers, slide pin bolts, rotors, pads. It's a heck of a lot cheaper to just buy the rebuild kit and find someone in your town (I guarantee a town the size of sacramento has shops that rebuild brake calipers, call around) to rebuild them.
The kit is only $80, it's going to cost you about $400 to swap to the non-brembo rears.
https://www.z1motorsports.com/rear-b...ar-p-5484.html
https://www.z1motorsports.com/brakes...r-p-15060.html
The kit is only $80, it's going to cost you about $400 to swap to the non-brembo rears.
https://www.z1motorsports.com/rear-b...ar-p-5484.html
https://www.z1motorsports.com/brakes...r-p-15060.html
#6
Just go to any parts store and ask for reman ones trade In your old ones
Problem solved they have brembo at some parts store's that are refurbished you will have to paint them but they are fully rebuilt and I believe they’re like $80 with your core check it out hopefully this works for your problem
Last edited by Car Mod King's; 10-28-2019 at 09:16 AM. Reason: typo
Thread
Thread Starter
Forum
Replies
Last Post