OEM Plenum / Intake Manifold Bolt Sizes - VQ35DE
#16
I drove ttrank's car solo
iTrader: (50)
Join Date: Mar 2009
Location: By the sea, Tx
Posts: 18,301
Received 1,486 Likes
on
1,221 Posts
G35 sedan w/ too much money in mods
#18
ill Sedan
iTrader: (87)
#22
does anyone know the bore on the intake of the upper plenum? trying to see if this is gonna even be worth it http://nwpengineering.com/
#23
#25
Helpful!!!
There are a bunch of threads on here asking for the sizes of the OEM plenum nuts & bolts. The OEM sizes are below - add 8-10mm if you're running a 5/16" plenum spacer.
Intake Manifold Collector (Upper)
Bolts 1, 3, 6, & 9 = M6 x 1 x 60mm (red)
Bolts 2, 4, & 5 = M6 x 1 x 45mm (yellow)
Bolts 7, 8, 10, 11, 13 - 16, & 18 = M6 x 1 x 25mm (green)
Nuts 12 & 17 = M6 (green; these nuts & studs are sometimes replaced with M6 x 1 x 25mm bolts in aftermarket applications)
Intake Manifold Collector (Lower)
Bolts 1-6 = M6 x 1 x 70mm (blue)
Nuts 7 & 8 = M6 (violet)
hopefully this helps someone who wants to go back to stock, but has misplaced their OEM bolts.
Intake Manifold Collector (Upper)
Bolts 1, 3, 6, & 9 = M6 x 1 x 60mm (red)
Bolts 2, 4, & 5 = M6 x 1 x 45mm (yellow)
Bolts 7, 8, 10, 11, 13 - 16, & 18 = M6 x 1 x 25mm (green)
Nuts 12 & 17 = M6 (green; these nuts & studs are sometimes replaced with M6 x 1 x 25mm bolts in aftermarket applications)
Intake Manifold Collector (Lower)
Bolts 1-6 = M6 x 1 x 70mm (blue)
Nuts 7 & 8 = M6 (violet)
hopefully this helps someone who wants to go back to stock, but has misplaced their OEM bolts.
The following users liked this post:
bigc (03-11-2016)
Thread
Thread Starter
Forum
Replies
Last Post
marsman328
Northern California
1
08-11-2015 07:29 PM