Drivers window leaking/rattling
#1
Drivers window leaking/rattling
So I've had this issue for quite a while now, and have decided to finally fix it. Unfortunately, i can't find a lot of information on how to adjust the drivers window.
Basically, at high speeds, the window will whistle. When it rains, or i decide to wash it, water leaks through. The seal has been replaced, but didn't fix anything. i stumbled across this thread, https://g35driver.com/forums/faq-diy...attle-fix.html and followed that, but just made everything worse. When i was done, i took the water hose to the window and water got all over the drivers seat, door panel, ect.
Does anyone have a definitive how to on how to fix this window issue?
Basically, at high speeds, the window will whistle. When it rains, or i decide to wash it, water leaks through. The seal has been replaced, but didn't fix anything. i stumbled across this thread, https://g35driver.com/forums/faq-diy...attle-fix.html and followed that, but just made everything worse. When i was done, i took the water hose to the window and water got all over the drivers seat, door panel, ect.
Does anyone have a definitive how to on how to fix this window issue?
#2
Hey guys, I'm reviving this thread as I'm having the same issue. I tightend up the lower bolts as I could see some space between the washer and track. I tighted the bolts up with a flat head screw driver until the washer was flat. I thought it would make things better, but it only worsened everything. This was after both sides had the old door weatherstripping removed and replaced with brand new OEM stripping. Not sure what to do now. Any suggestions? Thanks.
#3
Hey guys, I'm reviving this thread as I'm having the same issue. I tightend up the lower bolts as I could see some space between the washer and track. I tighted the bolts up with a flat head screw driver until the washer was flat. I thought it would make things better, but it only worsened everything. This was after both sides had the old door weatherstripping removed and replaced with brand new OEM stripping. Not sure what to do now. Any suggestions? Thanks.
i am imagining that others must have heard this whistling... anyone else?
#5
Thread
Thread Starter
Forum
Replies
Last Post
BradMD_96
Engine, Drivetrain & Forced-Induction
61
01-18-2016 05:56 PM
500hpG35
Exterior - Body Parts
0
10-31-2015 03:00 PM