G35 Coupe Headlight Removal Guide (3 Simple Steps)

[LCA575]

Originally Posted by CarFanatic56

LCA: whats the install like for the CCFL strips....can you show us a diy pics like how you did for the demon eyes?

I can make a diy guide but basically you remove the clearence strips, cut the back of them and insert the CCFL tube and secure it with a dab of silione.

[nyckid]

are those HID bulbs in the fogs also in that pic? or what? they match so well, can you please tell me what bulbs you use?

[LCA575]

Originally Posted by nyckid

are those HID bulbs in the fogs also in that pic? or what? they match so well, can you please tell me what bulbs you use?

The bulbs are not even on, that is just the demon eye rings.

[jim5437]

I bought 2 H4 PIAA 8000K light bulbs for my fog lights and the high beam lights. and 8000K HID D2R bulbs for the low beam. Can I install that myself? Or I will still need to OVEN it?

One more thing is that~!! There is another light bulb there~!!! a small light at the side! What is the type of the bulb? please let me know~!

Thanks you so much

Jim

[LCA575]

To replace the D2R and Fog bulbs you should be able to access them from under the hood. No need to remove the headlight.

[imRACERX]

Originally Posted by LCA575

To replace the D2R and Fog bulbs you should be able to access them from under the hood. No need to remove the headlight.

UNDER THE HOOD? TO REPLACE THE BULBS? dude, arent you the one with the full headlight install posts and pics? correct me if im wrong but the only way to get to the bulbs without removing headlamp is to go through the fender panel behind the headlamp, not through the engine bay/hood. RX

[jim5437]

One more thing is that~!! There is another light bulb there~!!! a small light at the side! What is the type of the bulb? please let me know~!

Thanks you so much

Jim

[SKYY-35]

...and closing the headlamp, how to keep it nice and tight as you "reseal" it and for how long??

[WaLLy]

i would like to say thanks alot LCA575!!! i just got done putting on my 06 projectors on my 05 and this thread helped me out aloooooot!

[WRAH]

Originally Posted by sky350GT

i would like to say thanks alot LCA575!!! i just got done putting on my 06 projectors on my 05 and this thread helped me out aloooooot!

love that avatar!

[gnut]

Hey LCA575, I think I saw your car about 1 week ago at the corner of Power and Williams. I live in Kenner...are you from this area? I was in front of you by several cars and nice by the way!

[LCA575]

Originally Posted by gnut

Hey LCA575, I think I saw your car about 1 week ago at the corner of Power and Williams. I live in Kenner...are you from this area? I was in front of you by several cars and nice by the way!

I hope you didnt see my car... its on a Dyno in Atlanta right now getting the e-manage tuned and I am in Vagas at a conference

Once I do get it back keep an eye out, I am in Metairie. Do you go to any local meets or anything? The New Orleans import scene has been even weaker (as if that was possible) since Katrina.

[accordfreak]

Originally Posted by twitch

Yes. You are correct. See the following TSB

It states "All current headlamp assemblies are vented to the atmosphere (not sealed)."

Scott

just wondering where are the vent holes? I want to make sure i don't seal it up or anything....

[ShwoffG35]

Can I pay someone to install my demon eyes if I get them...cause I tried heating up a headlight with my last car and fubared some stuff up and had to get a new headlight.

[Redsun]

question, the pic dosnt show how/if u can take the plastic cover off of the lights, mine our fogged and i think i need to take the entire plastic lenz cover off and wipe the inside of it. is this possible?