FS[Canada]: Retro fitted Projector headlights 03/04 Sedan
#1
06-16-2012, 08:29 PM
Retro fitted Projector headlights 03/04 Sedan
Going to change up my headlights a little bit and decided it would be better to start from scratch opposed to building on what's already been done with these.
Parts:
Morimoto Mini BiXenon Projectors D2S bulbs in 6k
Chrome Apollo shrouds
Ebay halogen headlight enclosures with black bezel and clear turn signal
Upper headlight has H1 HID 6k
These lights are a direct swap for 2003/2004 sedans and plug directly into the OEM harness. Two ballasts will need to be situated in the engine bay or fender well.
How they're wired
These lights were wired up a little differently than OEM, the lower portion, the projector is the Low beam and high beam and the upper is the fog light. These lights do NOT run a DRL. I chose this so the lights can be shut off completely when the car is running.
Fitment
When these were first installed fitment was pretty much on point, as far as I know now that my front fenders have been slowing pulling away from the hood some gaps have shown up. So fitment IMO would be 8/10, but on clean fenders you may not actually notice any issues at all.
Deal
These are up for a trade for $400 and CLEAN OEM headlights. Clean means, no broken mount points, no road rashed lenses and no aftermarket OEM replacement lights.
I can ship these if need be.
Located in Cambridge, Ontario.
Please note, the unusual colouring the in the lens is not actually there, it was just the polarizer on the camera that caught it.
Parts:
Morimoto Mini BiXenon Projectors D2S bulbs in 6k
Chrome Apollo shrouds
Ebay halogen headlight enclosures with black bezel and clear turn signal
Upper headlight has H1 HID 6k
These lights are a direct swap for 2003/2004 sedans and plug directly into the OEM harness. Two ballasts will need to be situated in the engine bay or fender well.
How they're wired
These lights were wired up a little differently than OEM, the lower portion, the projector is the Low beam and high beam and the upper is the fog light. These lights do NOT run a DRL. I chose this so the lights can be shut off completely when the car is running.
Fitment
When these were first installed fitment was pretty much on point, as far as I know now that my front fenders have been slowing pulling away from the hood some gaps have shown up. So fitment IMO would be 8/10, but on clean fenders you may not actually notice any issues at all.
Deal
These are up for a trade for $400 and CLEAN OEM headlights. Clean means, no broken mount points, no road rashed lenses and no aftermarket OEM replacement lights.
I can ship these if need be.
Located in Cambridge, Ontario.
Please note, the unusual colouring the in the lens is not actually there, it was just the polarizer on the camera that caught it.
Last edited by 4DGS; 06-16-2012 at 08:37 PM.
#7
06-17-2012, 01:23 PM
