Pic request: 25mm spacers on OEM 19s

[brandon402]

Can someone explain why not just do 25mm all around? Im asking because thats what I am planning on. Would that be bad? I see everyone is doing 20f and 25r. Explain?

[LightsOut]

person prefrence I must say.

I went 20/25 cause I wanted my wheels to look more aggresive on the rear than the front. 25 on the front look full flush while the rear will be sunken in.

[brandon402]

Originally Posted by LightsOut

person prefrence I must say.

I went 20/25 cause I wanted my wheels to look more aggresive on the rear than the front. 25 on the front look full flush while the rear will be sunken in.

Ah, i see. Ok, i was thinking there were some hidden benefits that I wasnt understanding. Thanks!

[eurodre]

25 all around because imo it looks the best because 30mm is wayy too much for stock wheels, i say it looks clean at 25 all around

[TantoG35]

how many inches was the drop and did you put spacers if so what was the measurments on the spacers

[eurodre]

29 inches from the fender, top of the fender to the bottom of the ground

[Xet]

anyone got pics of 25f/30r??

[Black Acc]

I got 25 all around, flush all around. To me it looks like the rears stick out more, but it might be just me. The rear is straight up flush and the front is just a tiny bit in, but still flush with the fender. Don't get 20s in the front, it will still stick in.

[LightsOut]

Originally Posted by Black Acc

I got 25 all around, flush all around. To me it looks like the rears stick out more, but it might be just me. The rear is straight up flush and the front is just a tiny bit in, but still flush with the fender. Don't get 20s in the front, it will still stick in.

are you running oem tire size? cause that might be the reason why

[Beebo]

i need to do this very soon

[Cubanl81]

25mm all around FTW

[07PEARL6MT]

That looks great cuban I think im going to do 25 all around. What kind of drop do you have?

[Cubanl81]

Z S Techs and I cut 1/2" on the rear springmount

[LightsOut]

^^^ are you on oem tire size

[marcellsr]

Looks very good, did you have to roll the rear fenders ??