100wattz

yeah tony is spraying the bumper with premier today and test fit tomorrow and paint it friday for sure. Are u painting the vent black or all one color?

i saw ur bumper today , There working on it .

Ask for Orlando
Auto Innovations
1337 Minnis Circle, Milpitas, CA 95035
408.956.8004

it doesn't matter, if u just wanna get the bumper he will take care of you.he probably prefer the whole thing to make easy to color match the color.

Yes, cause you will need to get the spring/collar out.

No, not the toe bolt, the bolt on the other end of the spring cup...closest to the wheel. I'm pretty sure the distance is proportioniate to the amount of thread you see on the collar. So, if you want an inch up, you need to add an inch of thread between the adjusters (silver things you turn) and the top of the collar (where the thread stops). Hope that makes sense

Hey Marc
What you will need
At least one jack stand (two if you want to raise the whole back end)
A floor jack
17mm socket or wrench

After you raise the car up and put it on stand/s, you need to take the jack and put it under the spring cup (where I installed the toe bolts). The jack needs to push up on the spring cup a little which will release some pressure on the front bolt (bolt closest to the wheel). Remove the bolt. You now need to slowly let the jack down which will also now bring the spring cup down. From there, you can push the spring cup further down by hand to release the spring and collar. Adjust the collar and reverse the instructions to re-install.