G35Driver - View Profile: jeovanni223

Showing Visitor Messages 1 to 6 of 6

10-21-2009 07:36 PM
ttrank

I did all the wiring myself. It's not hard to figure out, you can do it with a meter or even a test light. Cutting/fitting in the projectors and figuring out what shrouds to use is the more difficult part.
- View Conversation
10-21-2009 05:19 PM
G35papa

Nismo (aka Aero) kit. Nope, don't know anyone installing projectors.
- View Conversation
10-21-2009 11:58 AM
ttrank

I do not know anyone in that area who does this type of mod. You may have to mail them out or DIY. I did my own and it was my first time trying. The TL's won't fit on the top but you don't have to do all 4 if you do a TL set on the bottom. They can be your high and low beams.
- View Conversation
10-20-2009 08:29 PM
ttrank

There are no production lights for the 03-06 sedans with projectors, you have to retrofit projectors into your lights. It's not that hard but does take a lot of time. The most common lights used are Acura TL (the best bi-xenon out there), Honda S2000 (best low beam out there) and Acura TSX (another good, lower price low beam), G35 (decent), MB E-series, and others.
- View Conversation
10-19-2009 03:25 PM
jeovanni223

ok, thanks sweetie!
10-19-2009 10:13 AM
CaribbeanBlue

If you're asking about Orlando meets, just keep checking the most recent posts in this thread: http://g35driver.com/forums/florida-...ekly-meet.html. The meet locations change up every week, so that's the best way to keep track. Hope to see you at the next meet!
- View Conversation