Conversation Between ttrank and jeovanni223
Showing Visitor Messages 1 to 6 of 6
-
I did all the wiring myself. It's not hard to figure out, you can do it with a meter or even a test light. Cutting/fitting in the projectors and figuring out what shrouds to use is the more difficult part.
-
Ok thanks... Did you figure it out all on your own? Our is there some type of wire diagram that I can look up... I'm not that good when i comes to electrical parts..
-
I do not know anyone in that area who does this type of mod. You may have to mail them out or DIY. I did my own and it was my first time trying. The TL's won't fit on the top but you don't have to do all 4 if you do a TL set on the bottom. They can be your high and low beams.
-
Thx for the quick response... Do you know anyone in the Orlando area that might be able to help me with this mod? Also I would love to go with the TL liights my brother has a type s and his lights are bad ***.... Would I need to mix and match or could I do all TL?
-
There are no production lights for the 03-06 sedans with projectors, you have to retrofit projectors into your lights. It's not that hard but does take a lot of time. The most common lights used are Acura TL (the best bi-xenon out there), Honda S2000 (best low beam out there) and Acura TSX (another good, lower price low beam), G35 (decent), MB E-series, and others.
-
Hey ttrant... I have a 04 sedan myself and was hoping you could help me out... I want to get the projection lights for my G
