From the ashes we shall rise.
#1
From the ashes we shall rise.
Hello everyone, new to g35 driver but I have been a long time member of my350z.com. I am making my switch because recently my neighbor did me the courtesy of smashing in the rear end of my poor 350Z. Check out my post on my 350Z.com http://my350z.com/forum/engine-and-d...vetrac-v2.html. I was one day away from putting a wavetrac differential in my Z. Regardless I have a 2004 G35S coupe with rod knock that I picked up for 1300. I bought my Z back from my insurance company as well for another 1300 after they cut me a check for 8k. Not too bad.
I have been modding my 350z for 3 years and put a 40k motor and CD009 in after a blown motor. I put coilovers, roll center ball joints, poly bushings on every front suspension arm, JWT clutch/flywheel w/braided clutch line, master cylinder brace, 370z headers, ISR y pipe, z1 hfcs, a pop charger, plenum spacer, all rear lower suspension arms replaced with kinetix and voodoo13 with lockout washers to delete cams, nrg steering wheel, custom CNC machined aluminum motor and transmission mounts to lower the motor, a custom catback, walbro 255 fuel pump, and custom audio into my Z. All of that will make its way to the G along with my low miles DE/CD009 and of course the Wavetrac the Z never got.
I do all of my own work, which includes alot of CNC machining and fabricating custom parts. I plan to document as much as I can for your entertainment and education.
[URL=http://s636.photobucket.com/user/justin_mcaleer/media/Mobile%20Uploads/IMG_20161221_234744_129.jpg.html]
I have been modding my 350z for 3 years and put a 40k motor and CD009 in after a blown motor. I put coilovers, roll center ball joints, poly bushings on every front suspension arm, JWT clutch/flywheel w/braided clutch line, master cylinder brace, 370z headers, ISR y pipe, z1 hfcs, a pop charger, plenum spacer, all rear lower suspension arms replaced with kinetix and voodoo13 with lockout washers to delete cams, nrg steering wheel, custom CNC machined aluminum motor and transmission mounts to lower the motor, a custom catback, walbro 255 fuel pump, and custom audio into my Z. All of that will make its way to the G along with my low miles DE/CD009 and of course the Wavetrac the Z never got.
I do all of my own work, which includes alot of CNC machining and fabricating custom parts. I plan to document as much as I can for your entertainment and education.
[URL=http://s636.photobucket.com/user/justin_mcaleer/media/Mobile%20Uploads/IMG_20161221_234744_129.jpg.html]