Camber Kit Install
#1
Camber Kit Install
Hey guys, so the rims/tires are coming in soon and I'd like to get the SPC camber kit installed. What shops can you recommend to install this since it requires drilling into the under carriage?
I don't want to end up like this guy in other words: http://my350z.com/forum/brakes-and-s...one-wrong.html
I don't want to end up like this guy in other words: http://my350z.com/forum/brakes-and-s...one-wrong.html
#3
#7
Trending Topics
#10
Hey guys, so the rims/tires are coming in soon and I'd like to get the SPC camber kit installed. What shops can you recommend to install this since it requires drilling into the under carriage?
I don't want to end up like this guy in other words: http://my350z.com/forum/brakes-and-s...one-wrong.html
I don't want to end up like this guy in other words: http://my350z.com/forum/brakes-and-s...one-wrong.html
#11
@simpson
According to this you do have to drill:
http://my350z.com/forum/brakes-and-s...tallation.html
Installation:
A. Replace the lower control arm with the Camber Kit Arm. Use stock toe bolt here.
B. Remove the spring perch arm and reinstall with the Toe Bolt in the Kit. Use the template in the kit and a Dremel to drill out the hole. Make the hole only big enough so that the Toe Bolt BARELY turns 360. DO NOT MAKE THE HOLE TOO BIG OR THE TOE BOLT WILL MOVE EVEN AFTER TIGHTENING IT DOWN.
According to this you do have to drill:
http://my350z.com/forum/brakes-and-s...tallation.html
Installation:
A. Replace the lower control arm with the Camber Kit Arm. Use stock toe bolt here.
B. Remove the spring perch arm and reinstall with the Toe Bolt in the Kit. Use the template in the kit and a Dremel to drill out the hole. Make the hole only big enough so that the Toe Bolt BARELY turns 360. DO NOT MAKE THE HOLE TOO BIG OR THE TOE BOLT WILL MOVE EVEN AFTER TIGHTENING IT DOWN.
#13
#14