MyG37.com | G35Driver.com | My350Z.com | ZDriver.com
  
 
Show Your Support Become A Premier Member



Go Back   G35Driver > Tech Area > TSB- Technical Bulletins
User Name
Password
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read


Reply
 
Thread Tools Search this Thread Rate Thread Display Modes
  #1  
Old 11-12-2007, 11:56 PM
Registered User
 
Join Date: May 2007
Location: Washington D.C
Posts: 240
iTrader: (0)
Exclamation Covered Under Warranty ???

I was having a issue with a misfire in my number 4 cylinder ! I pulled the plug and found out that I have a burnt valve ! For all of the brainiacs on here ,would this be covered under warranty ? Just some added info ! If you don't know or have any smart a** comment then don't reply ! I opened this thread for answers . For those that have answers that may help I say sorry for all of the extra reading and thank you for your reply
Reply With Quote
  #2  
Old 11-13-2007, 05:26 AM
Registered User
 
Join Date: May 2007
Location: Washington D.C
Posts: 240
iTrader: (0)
Anybody ???? Thanks !!
Reply With Quote
  #3  
Old 11-13-2007, 03:42 PM
Registered User
 
Join Date: Nov 2007
Posts: 5
iTrader: (0)
Possible causes or problems

I doubt this is covered under warranty but lets see what we can figure out.

Ok before I can even begin to do a "CFDI" (computer Forum Diagnostic Inspection) you must first swipe your credit card information for the Diag charge to be covered. Just use the bottom of your optical mouse which for all Infiniti Owners converts instantly into paypal. Now offically that you have paid we can continue......

"plugs into USB port the CFDI connector" Lets see what do we have... scanning... scanning... scanning... scanning... scanning... scanning... scanning... scanning... scanning... scanning... scanning... scanning... scanning... scanning... scanning... scanning... scanning... scanning... scanning... scanning... scanning...

Damn Cannot Communicate with Overpriced Import! Please press abort to continue

"Pressing Abort"

...................................unable to abort......................................

Checking further into CFDI Troubleshooter for further problems listed or complaints

-Possible misfire or rough running condition and or causes of condition

1. Too many aftermarket parts from Pep Boys
2. Cyclone air technologies air intake not compatible, must have version AIR 47.998.7 Pro street Velocity Twin Stacks.
3. Matched hearing vibration relocation sensors. Only known cause is the constant replay of new JayZ album which leads to excessive missed shifts leaving driver to wonder if he has misfire when rev limiter is bouncing.
4. Chrome tip diameter does not match factory installed exhaust system causing excessive wait transfer to rear of vehicle.
5. Rubbing alcohol added for Octane booster not correct brand. Wallgreens Formula Only.
6. Signed the wrong car documents and found out that all along you have been driving a Honda Fit.

Further complications can be brought on by in the path of Mr.

Try installing a new International 13 Speed Manual ( it may take some modification but hell to you thats nothing )

If this doesnt correct your problem then repost another possibly dumb question or sell the car to someone who can drive it in and have it fixed instead of wasting time getting pissed while others are laughing their asses off!!

PEACE
Reply With Quote
  #4  
Old 11-16-2007, 03:10 PM
Registered User
 
Join Date: May 2007
Location: Maryland
Posts: 166
iTrader: (0)
^^^^^^^^^^^^^I'm not this dude^^^^^^^^^^^^^^^^
Reply With Quote
  #5  
Old 11-16-2007, 06:15 PM
Registered User
 
Join Date: Oct 2007
Posts: 27
iTrader: (0)
I really hope you found that online someplace and just did a copy paste, because writing all that just to mess with somebody is retarded.
Reply With Quote
  #6  
Old 11-16-2007, 11:25 PM
Registered User
 
Join Date: May 2007
Location: Washington D.C
Posts: 240
iTrader: (0)
Its one of my boys !!! I just haven't figured out which one it is !!! LOLO
Reply With Quote
  #7  
Old 12-11-2007, 10:12 PM
Registered User
 
Join Date: May 2007
Location: the yay area
Posts: 4
iTrader: (0)
How do you know you have a burnt valve by looking at the plug? You can't see the valve looking at the plug.
Reply With Quote
  #8  
Old 12-11-2007, 11:39 PM
DiamondGCoupe's Avatar
Not so Super Mod
 
Join Date: Sep 2004
Location: Boca Raton, Florida, US and A!
Posts: 1,981
iTrader: (0)
HAHAHA "scanning...scanning.." classic
__________________
'08 G37S Blue Slate/Graphite Premium, Sport, Nav Car Domain
Reply With Quote
  #9  
Old 12-28-2007, 12:57 PM
Registered User
 
Join Date: Mar 2006
Location: San Diego
Posts: 52
iTrader: (0)
It's something definately warrantied. I can't imagine them not fixing it unless your running NOS and your warranty expired.
Reply With Quote
  #10  
Old 12-29-2007, 07:40 AM
Registered User
 
Join Date: May 2007
Location: Washington D.C
Posts: 240
iTrader: (0)
Thanks for reply !!! Got new motor like a month ago !!! Thanks again gnasrawi !!!
Reply With Quote
Reply



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are On
Refbacks are Off
Forum Jump


All times are GMT -4. The time now is 03:00 PM.


Powered by vBulletin Version 3.5.2
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.2.0
Copyright ©2002 - 2008, G35DRIVER.COM All Rights Reserved.
Terms of Service - Privacy Policy - JOBS


MyG37.com | My350Z.com | ZDriver.com | G35Driver.com