WTB[Canada]: 15mm wheel spacers
#1
Join Date: Jul 2010
Posts: 185
Likes: 0
Received 0 Likes
on
0 Posts
#4
Join Date: Jul 2010
Posts: 185
Likes: 0
Received 0 Likes
on
0 Posts
i have been talking to 4DGS, pretty good guy, hes selling nice czp spacers for a pretty good price if any ones looking for them, only thing is, its a 2 hour drive for me.
i found some eibach's for a decent price $110 plus tax, i need them quick thanks the thing, they are not the best quality but i guess ill try them out thanks for all the help
i found some eibach's for a decent price $110 plus tax, i need them quick thanks the thing, they are not the best quality but i guess ill try them out thanks for all the help
#7
the bolt on spacers you want with the built in studs are always of inferior quality... every brand... i've stripped the studs on 2 sets of china spacers at different times... once on the 401 and once on the 406... fun times when your wheel start to come off... actually, one of the two sets i used was H&R... so not china
get ARP part number 100-7716, direct for front and rear on 350z / G35.
Then you do not need bolt on spacers... you can run slip-ons.
ARP studs are 20mm longer than stock and are 500% stronger than stock.
get ARP part number 100-7716, direct for front and rear on 350z / G35.
Then you do not need bolt on spacers... you can run slip-ons.
ARP studs are 20mm longer than stock and are 500% stronger than stock.
Trending Topics
#10
Join Date: Jul 2010
Posts: 185
Likes: 0
Received 0 Likes
on
0 Posts
Does everyone agree that any brand of pre studded spacers are not safe, because i can get the eibach 15mm at cost for 110 plus hst, and the other way i have to pay for studs and slip ons, and then sell my volk wheelnuts and get open end ones, i need to figure this all out before 4pm so i can place my order, let me know because i believe if you re torque the lugs and the spacers every so often they should be fine, any comments will help
#11
#12
Join Date: Jul 2010
Posts: 185
Likes: 0
Received 0 Likes
on
0 Posts
well here is where im at now,
how much do you think it would cost to do the second option if some one has what i need for sale pm me the price,
my cars been sitting since last summer so i wanted to get it on the road quick,
i can get some parts brands at cost,
option #1, stick with the eibachs i can have them tomorrow, and be carefull when torqueing,
option #2 sell my short rays nuts
i can get cheaper wheel nuts like gorilla, or mcgard
try and find some extended wheel nuts, rays ($250) etc..
get some 15mm slip ons, (cant go more then 15mm) (roughly 120)
get some extended studs 100-7716 ($79 for 10)
total 449
the studs at 2 of my warehouses are back ordered, they are $34 plus tax for (5)
how much do you think it would cost to do the second option if some one has what i need for sale pm me the price,
my cars been sitting since last summer so i wanted to get it on the road quick,
i can get some parts brands at cost,
option #1, stick with the eibachs i can have them tomorrow, and be carefull when torqueing,
option #2 sell my short rays nuts
i can get cheaper wheel nuts like gorilla, or mcgard
try and find some extended wheel nuts, rays ($250) etc..
get some 15mm slip ons, (cant go more then 15mm) (roughly 120)
get some extended studs 100-7716 ($79 for 10)
total 449
the studs at 2 of my warehouses are back ordered, they are $34 plus tax for (5)
#14
Join Date: Jul 2010
Posts: 185
Likes: 0
Received 0 Likes
on
0 Posts
ok so it looks like im going to go the safer way because i dont want to have an issue down the road, your right
-so does anyone know where to get 100-7716 arp studs for a good price, hopefully in stock
- what brand of slip on hubcentic spacers should i use i need 15mm
- what wheel nuts should i use, close end extended or open end, and if you know of any good ones for decent price
please let me know
-so does anyone know where to get 100-7716 arp studs for a good price, hopefully in stock
- what brand of slip on hubcentic spacers should i use i need 15mm
- what wheel nuts should i use, close end extended or open end, and if you know of any good ones for decent price
please let me know
Last edited by infinitig35_6mt; 06-20-2011 at 10:53 PM.
Thread
Thread Starter
Forum
Replies
Last Post