20" rims from Japan
1 Attachment(s)
i bought this 2nd hand and i now thinking about selling. Please pay cash and it's all your. 3000
rear rim 10.5 front rim 9.5 I am just having a had time w/ the offset and don't want to go that route. There the only rims here in the US, and imported from Japan. i am in the LA area i am not going to ship. |
isnt this kurtis's old wheels?
|
What are u having a hard time with they arent aggressive..
|
Little more info would help you.
|
that was quick! :confused2:
|
these wheels are coupe fitment. the OP was going to try and fit them on a 2nd gen sedan which could only possibly be done with very agressive camber and a super stretch tire
|
Unless i am going to all the wrong places, no one want to pull my fender w/out doing real damage to the car. maybe i should try one more place b4 making a huge decision
|
What company makes these wheels?
|
Rays
|
i think the offsets on these are around 20's right? you can fit it w/ sedans just need stretch tires and a bit of camber
|
This is from the other post.
20"x9.5" +27 high disk and 20"x10.5" +27 high disk You can run a 225/40 f and 245/40 rear and it should fit. |
It should fit maybe but i still have to deal w/ extra passengers that i carry in the back seat and it will still rub. So, i know i just bought them but now i am going to sell them. I'll just go w/ 19". N/e buyers?
|
bump for a homie....
i was telling hiim to get some springs if anything and run camber then run 255/265 tires in the rear to stretch them and roll the rear fenders and it should be good but he didnt want to... so bump for a homie!!! |
I don't think u can roll the fender. the 2007+ fenders r welded on there.
|
all these people and no one want to buy?
|
Oh I wants em! I'm only about $2990 short :( bah! GLWS
these rims make me happy in the pants :biggthumpup: |
Originally Posted by jookyshank
(Post 4454086)
Oh I wants em! I'm only about $2990 short :( bah! GLWS
these rims make me happy in the pants :biggthumpup: |
Did you change the sn?? I almost didn't recognize u. Lol
|
Originally Posted by B L U E S L A T E
(Post 4455852)
Did you change the sn?? I almost didn't recognize u. Lol
|
u should try D2 in Alhambra they rolled my fenders, did a nice job!
|
2nd gen sedans do not require fender rolls. They come pre-rolled from the factory.
What we need is a nice fender pulls, but I guess if AE said it's gonna be a headache than it's really gonna be hard. :/ |
Thanks for all the advice for wheels i got but i am just going to go though w/ it and sell them. I see these other wheels i want now but need to sell mine first.
|
streeeetch!! :D and NEG CAMBER!
bwahahahaha |
Originally Posted by B L U E S L A T E
(Post 4457311)
streeeetch!! :D and NEG CAMBER!
bwahahahaha |
Want to trade wheels? Call me man I'm off monday
|
Anceltion is the company that makes these wheels. ...unless they were manufactured by another company and stamped as an anceltion wheel. You'd probably have better luck selling these wheels on VIP forum since more peeps over there know the rarity of these wheels. i would pick these up but need something more aggressive.
|
So i did a test fit w/ the tire and to pull the fender is too much. Unless i put thing that i can't remember the name of that will raise my car up so it won't rub. So, now i just want to sell and get something else
|
All times are GMT -4. The time now is 07:28 AM. |
© 2024 MH Sub I, LLC dba Internet Brands