DIY: Add a sub to your Bose equipped G35 Coupe
#362
Registered User
iTrader: (8)
Join Date: Nov 2007
Location: VA
Posts: 3,615
Likes: 0
Received 0 Likes
on
0 Posts
anyone?!? would it make a difference if i plugged em right behind the head unit instead?
Head unit output colors
The (+) are all on the same side of the connector.
Head Output Front Right + Orange/Blue
Head Output Front Right - White/Blue
Head Output Front Left + White
Head Output Front Left - Orange
Head Output Rear Right + Blue
Head Output Rear Right - Pink
Head Output Rear Left + Teal
Head Output Rear Left - Purple
Remote Wire Light Blue/ Silver
btw setup is
alpine m450
Infinity Kappa Perfect 10. 10''
rockford fosgate wiring kit w 60 amp fuse in fuse holder.
Head unit output colors
The (+) are all on the same side of the connector.
Head Output Front Right + Orange/Blue
Head Output Front Right - White/Blue
Head Output Front Left + White
Head Output Front Left - Orange
Head Output Rear Right + Blue
Head Output Rear Right - Pink
Head Output Rear Left + Teal
Head Output Rear Left - Purple
Remote Wire Light Blue/ Silver
btw setup is
alpine m450
Infinity Kappa Perfect 10. 10''
rockford fosgate wiring kit w 60 amp fuse in fuse holder.
Last edited by Roguewolf; 05-16-2009 at 12:02 AM.
#363
Registered User
iTrader: (2)
Join Date: Jan 2009
Location: Tallahassee, FL
Posts: 823
Likes: 0
Received 0 Likes
on
0 Posts
anyone?!? would it make a difference if i plugged em right behind the head unit instead?
Head unit output colors
The (+) are all on the same side of the connector.
Head Output Front Right + Orange/Blue
Head Output Front Right - White/Blue
Head Output Front Left + White
Head Output Front Left - Orange
Head Output Rear Right + Blue
Head Output Rear Right - Pink
Head Output Rear Left + Teal
Head Output Rear Left - Purple
Remote Wire Light Blue/ Silver
btw setup is
alpine m450
Infinity Kappa Perfect 10. 10''
rockford fosgate wiring kit w 60 amp fuse in fuse holder.
Head unit output colors
The (+) are all on the same side of the connector.
Head Output Front Right + Orange/Blue
Head Output Front Right - White/Blue
Head Output Front Left + White
Head Output Front Left - Orange
Head Output Rear Right + Blue
Head Output Rear Right - Pink
Head Output Rear Left + Teal
Head Output Rear Left - Purple
Remote Wire Light Blue/ Silver
btw setup is
alpine m450
Infinity Kappa Perfect 10. 10''
rockford fosgate wiring kit w 60 amp fuse in fuse holder.
Are you positive that your specific amp and sub combination works? I had one combination that worked, I changed the subwoofer, and it still worked, but when I changed the amplifier, it just didn't work right. I would turn it up and it would cut out. I'd have to turn the whole car off, then turn it back on before the amp would put power to the sub again. I changed amps and it was OK for a while, then I changed the amp AGAIN and it blew the subwoofer haha. I just said F-it and went back to my original setup which I knew worked.
Just saying, working with stock wiring just seems to be much more difficult than if you have an aftermarket HU which is designed to do all the stuff you're trying to do... Stock is NOT lol
#365
Registered User
iTrader: (2)
Join Date: Jan 2009
Location: Tallahassee, FL
Posts: 823
Likes: 0
Received 0 Likes
on
0 Posts
Look at it this way... If you're standing at the back of the car, the wires are coming from the front right? Well, the part of the amp that's closest to the front is the INPUT and the wires which are going towards the rear of the car are the OUTPUT. You want to splice into the wires on the input side, before they go into the amplifier for processing!
I'm going to bed, I'll get back with you tomorrow haha. If you have AIM feel free to get at me on there and I'll see if I can help you more.
#367
#368
#369
Registered User
iTrader: (1)
Join Date: Nov 2008
Location: Fines Creek, NC
Posts: 233
Likes: 0
Received 0 Likes
on
0 Posts
I think I am correct in saying that you will need RCA cables (the usual RED/White male ends) However, each end should be made of 2 strands so you can splice 4 wires total into the INPUT. I am having trouble finding RCA cables that I can use for this job though..most seem only to come with the Usual RED/White Male ends...with only 2 wires.... Anyone have any ideas?
#370
Lets say you cut the yellow RCA cable in half, there are going to be two wires: one for positive and one for negative. Now you can connect the yellow to the "LEFT" so the colors for that is: TEAL for positive and PURPLE for negative. SIMPLE.. Now use RED for "RIGHT" it's easy to remember since you can remember by the first letter RED "RIGHT". Cut it so the wires expose and then one is for positive and one is for negative. Colors for that is: BLUE for positive and PINK for negative. Now plug the RCA "yellow" into L and "red" into R.
#373
just bought my first G this week and I have two 10" w6v2's, one JL 500/1, a JL 300/4, JL xr (2 way front) and vr's (rear), left over from my last car. I was going to sell them but after reading this I am going to do exactly what you did! awesome...anyone want the rest of my other stuff?!?
#374
just bought my first G this week and I have two 10" w6v2's, one JL 500/1, a JL 300/4, JL xr (2 way front) and vr's (rear), left over from my last car. I was going to sell them but after reading this I am going to do exactly what you did! awesome...anyone want the rest of my other stuff?!?