G35Driver - Infiniti G35 & G37 Forum Discussion

G35Driver - Infiniti G35 & G37 Forum Discussion (https://g35driver.com/forums/)
-   Audio, Video & Electronics (https://g35driver.com/forums/audio-video-electronics-20/)
-   -   How Do I Get CD's Out of Stock Head Unit on 04 G??? (https://g35driver.com/forums/audio-video-electronics/179338-how-do-i-get-cds-out-stock-head-unit-04-g.html)

walesinc Sep 24, 2007 12:55 PM

How Do I Get CD's Out of Stock Head Unit on 04 G???
 
I did the double din conversion on a 2004 g35 this weekend. All was going well until I realized that I had forgotten to get 6 cd's out of the stock head unit.

I hadn't put the dash back together yet, so I unplugged the new head unit/ac controller and plugged the stock one back in. I thought that it would power up and I would be able to eject all of my cd's.

No Such Luck....

When I plugged the stock unit back in, all the lights on it were blinking non-stop. No matter what I did, the lights were blinking. non-stop. whether the key was in or out didn't matter.

Does anybody know what I did wrong or if there is an install step that I need to do to get the stock head unit/ac controller to work again?

Further... Since the new headunit is in and the car is all put back together: does anybody know how I can get the cd's out without pulling the dash apart and plugging it into the wire harness in the car?

THANKS FOR ANY HELP

jbroadbent001 Sep 24, 2007 03:10 PM

Take it apart and pull them out. TIP: Make sure you keep all the little screws in a safe place and remember which screws go where. It wasn't fun. At least, that worked for me. My cd changer wasnt really operational so I had nothing to loose. I already had the CD ERR F0 issue going for me. Taking it apart, removing the cds and putting it back together did nothing but get my cds back. The new unit, AVIC-D3, is in the mail.

suicidesam Sep 24, 2007 03:13 PM

http://img113.imageshack.us/img113/8...edimagecq5.gif

walesinc Sep 24, 2007 03:26 PM

thanks. at least I know i can pull it apart if all else fails.

Any idea what is causing it to blink and not be responsive? My cd player worked FINE before I unplugged it. Except of course, the fact that it sounded like sh1t.

g35rcr Sep 24, 2007 04:08 PM

are they burned cd's or originals..if they are burned just screw it, else if you know a tech they can pop them out

Deezflip Sep 24, 2007 04:14 PM


Originally Posted by walesinc
thanks. at least I know i can pull it apart if all else fails.

Any idea what is causing it to blink and not be responsive? My cd player worked FINE before I unplugged it. Except of course, the fact that it sounded like sh1t.

If you did a double din conversion, maybe you still had the double din AC controller connected. The original radio had the ac controller all in one circuit board.


All times are GMT -4. The time now is 04:57 AM.


© 2026 MH Sub I, LLC dba Internet Brands