Everyone with a NAV-TOOL unit for 2003-04 g's
 

I recieved my unit the other day and 2 wires were not connected to the white harness. Facing back of the White harness where the red wires go in and the push tab up from right to left pins # 2 and 3 are out. On the 9 pin 5 pin up 4 pin down, pins they relate to are 1 and 2 from right to left.

I don't want to deal with shipping it back and then waiting for another one. Please tell me which one goes where so I can put the wires back in the right way and I can get everything done...

Thanks for all the help fellas...

On a side note, everyone with aftermarket radio's using the amp intergration metra harness did you use the amp and radio ground or just tape it off? I taped mine off and I can't tell if the rear deck speakers are working or not? The amp powers all speakers right so the rear behind the rear coupes seats should work together with the mid side rear speakers correct??

Ahaha, sorry if you guys get confused with my vague descriptions but any help would be great.. Pics will be posted shortly..

Thanks again

Please note the short and long black marker lines on the 9 pin connector and wires

http://i215.photobucket.com/albums/c...IMG_1218-1.jpg

http://i215.photobucket.com/albums/c...8/IMG_1217.jpg

http://i215.photobucket.com/albums/c...8/IMG_1216.jpg

http://i215.photobucket.com/albums/c...8/IMG_1216.jpg

http://i215.photobucket.com/albums/c...8/IMG_1205.jpg

Thanks again for any help fellas..

Nevermind guys.. I finally got tech support to go over it over the phone and I finally have everything up and going.. Thanks for your time..