Navi Voice + JL Amp = F'cked up
 

So i ripped out that POS bose amp, i got 2 jl's inplace of it. A 300/4 for the 6.5s and a 500/1 for my 2 10's. My problem is that now when i use my navi, the womans voice is crazy loud. Even with the volume on the navi voice option adjustment all the way down, the voice is soo loud, it rattles my front door 6.5s, wut can i do, which wires to the amp are for the navi voice, id gladly put that lil amp back in and just run those specific wires for the navi, plz help, it sucks .

hahaha, sorry.... "GO LEFT ON FIFTH"

Try adjusting the input sensitivity on the 300/4. I had the same problem on mine, (but reversed...my nav voice was too low.) This can solve your problem easily.

http://www.members.aol.com/bavariancoupe/r34mines.gif

Yup... the first thing I would do to remedy the issue is to play around with the input sensistivity of the amp. As with any system, it takes a bit of fine tuning to get the sounds (or bugs) worked out.

Good luck. :)

My girlfriend sounds like that already :D