JDM v35 dual-din HVAC panel pinout
 

Does anyone have access to JDM Nissan service manuals or a ~2006 JDM v35 350GT/G35 coupe double din HVAC panel? I need a pinout or pictures of both sides the wires going into the plug, I already converted it to work with usdm dual climate, but the seller cut the plug off, and the colors are different from usdm. Spent 6 hours now searching and I can't find anything, please help!
https://cimg9.ibsrv.net/gimg/g35driv...222b4d1249.jpg

PM me some pics of the back of the PCB. I'll try to help you out since I'm cutting a 05' board down and can hopefully get you some wiring info.

I figured it out a couple days ago, I forgot to post. after I figured out the power, ground, and illumination pins by reverse enginering/comparing old and new boards I noticed having those 3 figured out that the pin #s on the JDM board correspond to the USDM board if you number them 1-12 bottom to top including empty spots, ends up with no extra wires and gaps in the same place, just mixed up with different colors. I made a chart on paper with the pinout #s and colors of both and sat down and soldered it all up and it works.hopefully this helps somebody in the future that has this issue, because I was really stuck! if i had kept waiting for a wiring diagram i'd have been screwed.

here are the pics of both board's wires also for reference:
https://cimg9.ibsrv.net/gimg/g35driv...df3eef14ae.jpg
jdm
https://cimg4.ibsrv.net/gimg/g35driv...dceb351129.jpg
jdm
https://cimg0.ibsrv.net/gimg/g35driv...cfe17d0a78.jpg
usdm
https://cimg1.ibsrv.net/gimg/g35driv...70e3234246.jpg
usdm


I soldered the button for dual climate onto the board, as well as the led backlight for the button and switched the plastic button panel from the old one, but the dual climate button still doesn't work at all, or even light up. not sure if i was supposed to do more, i heard about swapping a chip from the old board as well, and i have the hot air-soldering equipment to do it, but i haven't been able to find any good documentation on this.

Cool, thanks for the pics. I haven't seen a JDM 05-06 board yet. It's interesting that they didn't use the same CPU for the HVAC control... Not sure why your dual isn't working, I've seen the older generation boards add a switch and LED and work but not the newer ones yet.