Which springs to go with my Work VS-XX's?
 

06 g35c without sport suspension
currently have oem 17s

will be getting:
Work VS-XX 19x9.5 +23 or +24 offset (custom center disk) front
Work VS-XX 19x10.5 +23 or +24 offset (custom center disk) rear
Toyo T1R: 255/275

im dropping the g this friday (so i need to make a decision fast) but i dont know if i should go with..

1) 350z h techs (i hear its good for a -.8/-.7 drop)
2) g35 s techs (i hear its good for a -1.1/-.9 drop)
3) other - what brand and how much of a drop is it good for?

EDIT: i don't want to get a camber kit!

h techs for g35!

just read that u dont want kits, otherwise i would say tein s techs coilover but otherwise i hear the 350z ones are good, gl :)

thanks for the quick responses guys. keep them coming :)

i wanna slam my g but i would be way too pissed every time i scrape :(

lmk what guys think! :D

Why not get a rear camber kit ? The SPC rear kit is only about $120.00 for arms & bolts or just $60.00 for the bolts.You are spending alot of money why not protect your tires ? In the long run it will pay for itself.You say you want to be low,so do the right thing and get a camber kit.

get h&R i have them but don't have time to get them installed 1.3 front 1 rears

What are your intentions for the drop? lower stance for show? better handling? Do you have a steep driveway? Are you concerned about rough roads?

yo ahero...doesnt someone in the san diego meet have the 350z h-techs on there car...or wait i dont think you showed up that day, but yea bro 350z h-techs fo sho...i wanna see your car on fri or when ever dude...so you can hear mine too

hmm ive been quoted 230 for the arms and bolts and 50 for just the bolts

just the bolt install i was quoted 300..way too much for me right now..

hmm..

Yeah, heard the H-Techs for a Z put on a G are somewhere between the S-Techs and H-Techs for a G in drop.

I'm looking at Swift sport compact springs for my drop (F-1.0; R-0.6). Heard they're very good. No break-in sag, etc. But also considering Cusco or Swift coil-overs as well.

check this thread out

it was very helpful to me to see the comparison side by side

https://g35driver.com/forums/showthr...techs+pictures

What are the best to use with a 20 inch wheel and just fill the gap it leaves i dont want to slam my car I just want to clear up some wheel gap. I have stock 19's on it now. Id like to get something that keeps it as close to stock ride as possible also

I hear good things about the Tanabe GF springs.

How much wheel gap can you handle? If you go with H-Tech's, you will have about a 1" gap all around. With S-Tech's or lower, you need the SPC Camber Kit. If you have the money, I would say Tein Basics.

Ps. I got some Tokico shocks for sale locally, if my sale now doesn't go through.

talked to a friend today and he says i dont need cambers with s techs. just rotate my tires every 3500 miles

i will probably end up doing that