mine

FRONT:
Racing Brake
4-Pot 13"
1. Zenetti Five 20x8.5 +40
2. Sevas S-55 20x8.5 +40 (just clears)
3. 5-Zigen FN01R-C 17x8 +43

Brembo
1.

StopTech
1. 14.1" 4 pod Amistad 19" Rotino 19X8.5 +37
2. 13" 4 pot, FN01R-C 17x9 +35 (track), otherwise OEM rims
3. 13" ST-40, FN01R-C 17x8 +35 (3-4mm of clearance)
4. 13" ST-40, Stock Mitsu EVO 8 Enkei 17x8 +38 (plenty of clearance)
5. 18x8*OEM; 335x32 Slotted AeroRotors [F&R] [6-Pot ST-60 [F] & 4-Pot ST-45[R], (2-3mm clearance on rear is close, but works - 3-4mm front is Ok)
6. 18x9 SSR GT2-H (track) 335x32 Slotted AeroRotors [F&R] [6-Pot ST-60[F] & 4-Pot ST45[R] calipers (plenty of clearance F&R)
7. 19x8.5 Tenzo-R DC-5 Black 332x32 slotted 2 piece ST-40
8. 4-pot ST-40 355mmx32mm, Anceltion SPSIX Revo 20"x9.5" +27 high disk
9. 4-pot ST-40 355mmx32mm, Enkei NT03+M 18"x9.5" +27
10. 4-pot ST-40 355mmx32mm, RacingHart RS521 19x9.0 +26 (Good Clearance)

Endless
1. Endless 6 pod 14.1" Amistad 19" Rotino 19X8.5 +37
2.- Racing-6 Pot Calipers - 370mmx32mm VOLK G2 20X10+30
Project Mu
1.

Rotora
1. 6-pot 355mmx32mm Volk GT-7 19"x8.5" +23 high disk
2. 6-pot 355mmx32mm Junction Produce Scara Japan 19"x9.5" +23 high disk (needed 3mm spacer)
3. 6-pot 355mmx32mm Volk SF-Challenge 19x9.5 +28
4. 12-pot 380mmx34mm iForged Aero 20x8.5 +40 (sedan)
5.12 pot 380 mm HRE 944 20x9.5
6. 6-pot 355mm x 32mm Rota Torque 18x9.5(Rota P45R 18x9.5)

Megan
1.14.25" / 6 piston with 18" Nismo's 18" Axis Reverbs, most Volk wheels, etc.
2.14.25" / 6 piston with 19" Seva S-Stars w/ 10MM Spacers (daily) & 18" MB Weapons (track)

Wilwood
1. 14.1" 6 piston Wilwood Stock 17" Sedan wheels
2. 13" x 1.37 rotors, SL-6 Wilwood, 17X8 5Zigen wheels
3. AZ Z Car kit, 13" 4-pot FSL, 5Zigen FNO1R-C 17x8 +43
4. 14" x 1.25" Wilwood factory drilled & slotted rotors/ Wilwood SL6 Calipers (Red) with Rays Eng. Coupe 19s
5. 14" Wilwood factory drilled and sloted rotors with 6 piston SL6 calipers same as candlestickpark but in black. 18 inch Ray's Engineering 350Z track (18x8 +30 offset)

Ksport
1.

AP Racing (Stillen)
1.14.25" / 6 piston with 18" Nismo's 18" Axis Reverbs, most Volk wheels, etc.
2. Beware: '03 Coupe 18x8*OEM wheels; P/N AP3700 (front) 6-Pot w/14.25" rotors too tight to trust w/< 1mm -2mm! P/N AP3750 w/ 4-Pot is ok on rear. Stillen says should be OK on front, measure and decide 4 u-sef!

D2 Racing
1. 356mm / 8 piston with 19x8.5 Volk Racing GT-S (Sedan)

REAR:
Racing Brake
OEM with 13" rotor
1. Zenetti Five 20x10 +43
2. Sevas S-55 20x10 +40

Brembo
1.

StopTech
1. 13" 2-pot, FN01R-C 17x9 +35 (track), OEM otherwise
2. 4-pot ST-45 355mmx32mm Junction Produce Scara Japan 19"x10.5" +24 medium disk with step lip (does not fit without 10mm spacer!!!)
3. 13" 2-pot, iForged Essen 19x9.5 +45 and sometimes OEM sport 18's
4. 4-pot ST-45 355mmx32mm Anceltion SPSIX Revo 20"x10.5" +27 high disk
5. 4-pot ST-45 355mmx32mm Enkei NT03+M 18"x10.5" +30
6. 4-pot ST-45 355mmx32mm, RacingHart RS521 19x10.5 +22 (Barely Clears)

Endless
1.Racing -4 Pot Calipers - 355mmx32mm VOLK G2 20X11 +15

Project Mu
1.

Rotora
1. 4-pot 355mmx32mm Volk GT-7 19"x9.5" +24 standard disk
2. 4-pot 355mmx32mm Junction Produce Scara Japan 19"x10.5" +24 medium disk with step lip
3. 4-pot 380mm x 34mm Maya GR5 20x10.5 +29
4. 4-pot 355mm x 32mm iForged Aero 20x10 +42 (also Volk GT-C 20x9.5 +47)
5. 4-pot 355mm x 32mm Volk SF-Challenge 19x10.5 +23
6. 4-pot 355mm x 32mm iForged Aero 20x10 +42 (sedan)
7. 4 pot 380 mm HRE 944 20x11 (might change to 20x10.5) G37
8. 4-pot 332mm x 32mm Rota Torque 18x9.5(Rota P45R 18x9.5)

Megan
1. 13.5" 4 piston with 18" Nismo's 18" Axis Reverbs, most Volk wheels, etc.
1. 13.5" 4 piston with 19" Seva S-Stars (daily) & 18" MB Weapons (track)

Wilwood
1. 13" 4 piston Wilwood factory kit with 18" Ray's Engineering 350Z Track 18's (18x8.5 +33 offset)

Ksport
1.

AP Racing (Stillen)
1. 13.5" 4 piston with 18" Nismo's 18" Axis Reverbs, most Volk wheels, etc

D2 Racing
1. 328mm / 6 piston with 19x9.5 Volk Racing GT-S (Sedan)

please add Alliance to the list :)

Alliance Anodized red BBK....

Front: 8 Piston, 380mm/15" rotors
Rear: 6 Piston, 356mm/14" rotors

I just got the 4th set ever released.. (compete w/ and perform like Rotora)

Futura Designs
14" slotted rotors
8/6 Pot
Purple Calipers..

http://i295.photobucket.com/albums/m...G_4969_web.jpg


as far as wheels waiting on my Venaci Mesh (made by work)
Burning black face, polished lip
20x9.5 +5 front
20x11 +15 rear

Twalls those looke a lot like alliance bbk.. Damn I'm loving that purple!!! Hahaha

Thanks big dawg... Trying to be unique like you... Yeah purple is my secondary color..

Basing my build off of the x-men nemisis Mystique.. Blue skin and purple highlights.. heheheheheheh..

I'm really thinking about a custom color though (cuz of your thread)..

Get a custom chameleon color that shifts from blue to dark purple that would look sick!! Or even if you could spray it ontop of TWilight blue it looks nice

Work vs-xx custom color* now*
had rotora 6/4 on the car
ProjectMu on the way :) will lost pics when installed, can't wait :JAMIN:

Twalls run a 9.5 -0 and a 11+6 and you'll be flush on OEM body and still be able to run a bbk make sure the front is a High disk and the rear is a medium disk

Futura Design said they can make a rainbow colored caliper. I haven't seen pics, but I'm assuming it's similar to the APP rainbow color.

Edgar, I like your style on the paint choice.. hmmmmm...

I thought about going more aggressive on the wheels but I'm kind of "graduating" to that.. Considering the TSWs I have now are +25 front and +20 rear, I'm definitely jumping up w/ the Venacis... I think once I get my DD, I'll be able to get something insane on my next wheel setup..

Those look just like My alliance BBK. http://i298.photobucket.com/albums/m...h/IMG_5221.jpg

http://i298.photobucket.com/albums/m...h/DSC_5678.jpg

they're the same setup, just a different engraving...I thought everyone knew now that these are just relabeled and marked up korean/chinese brakes. I'm not saying they suck, but they are the same.

Another stoptech addition
 

FRONT:
Racing Brake
4-Pot 13"
1. Zenetti Five 20x8.5 +40
2. Sevas S-55 20x8.5 +40 (just clears)
3. 5-Zigen FN01R-C 17x8 +43

Brembo
1.

StopTech
1. 14.1" 4 pod Amistad 19" Rotino 19X8.5 +37
2. 13" 4 pot, FN01R-C 17x9 +35 (track), otherwise OEM rims
3. 13" ST-40, FN01R-C 17x8 +35 (3-4mm of clearance)
4. 13" ST-40, Stock Mitsu EVO 8 Enkei 17x8 +38 (plenty of clearance)
5. 18x8*OEM; 335x32 Slotted AeroRotors [F&R] [6-Pot ST-60 [F] & 4-Pot ST-45[R], (2-3mm clearance on rear is close, but works - 3-4mm front is Ok)
6. 18x9 SSR GT2-H (track) 335x32 Slotted AeroRotors [F&R] [6-Pot ST-60[F] & 4-Pot ST45[R] calipers (plenty of clearance F&R)
7. 19x8.5 Tenzo-R DC-5 Black 332x32 slotted 2 piece ST-40
8. 4-pot ST-40 355mmx32mm, Anceltion SPSIX Revo 20"x9.5" +27 high disk
9. 4-pot ST-40 355mmx32mm, Enkei NT03+M 18"x9.5" +27
10. 4-pot ST-40 355mmx32mm, RacingHart RS521 19x9.0 +26 (Good Clearance)
11. 14" 6-pot ST-60 355x32, OME 19"

Endless
1. Endless 6 pod 14.1" Amistad 19" Rotino 19X8.5 +37
2.- Racing-6 Pot Calipers - 370mmx32mm VOLK G2 20X10+30
Project Mu
1.

Rotora
1. 6-pot 355mmx32mm Volk GT-7 19"x8.5" +23 high disk
2. 6-pot 355mmx32mm Junction Produce Scara Japan 19"x9.5" +23 high disk (needed 3mm spacer)
3. 6-pot 355mmx32mm Volk SF-Challenge 19x9.5 +28
4. 12-pot 380mmx34mm iForged Aero 20x8.5 +40 (sedan)
5.12 pot 380 mm HRE 944 20x9.5
6. 6-pot 355mm x 32mm Rota Torque 18x9.5(Rota P45R 18x9.5)

Megan
1.14.25" / 6 piston with 18" Nismo's 18" Axis Reverbs, most Volk wheels, etc.
2.14.25" / 6 piston with 19" Seva S-Stars w/ 10MM Spacers (daily) & 18" MB Weapons (track)

Wilwood
1. 14.1" 6 piston Wilwood Stock 17" Sedan wheels
2. 13" x 1.37 rotors, SL-6 Wilwood, 17X8 5Zigen wheels
3. AZ Z Car kit, 13" 4-pot FSL, 5Zigen FNO1R-C 17x8 +43
4. 14" x 1.25" Wilwood factory drilled & slotted rotors/ Wilwood SL6 Calipers (Red) with Rays Eng. Coupe 19s
5. 14" Wilwood factory drilled and sloted rotors with 6 piston SL6 calipers same as candlestickpark but in black. 18 inch Ray's Engineering 350Z track (18x8 +30 offset)

Ksport
1.

AP Racing (Stillen)
1.14.25" / 6 piston with 18" Nismo's 18" Axis Reverbs, most Volk wheels, etc.
2. Beware: '03 Coupe 18x8*OEM wheels; P/N AP3700 (front) 6-Pot w/14.25" rotors too tight to trust w/< 1mm -2mm! P/N AP3750 w/ 4-Pot is ok on rear. Stillen says should be OK on front, measure and decide 4 u-sef!

D2 Racing
1. 356mm / 8 piston with 19x8.5 Volk Racing GT-S (Sedan)

REAR:
Racing Brake
OEM with 13" rotor
1. Zenetti Five 20x10 +43
2. Sevas S-55 20x10 +40

Brembo
1.

StopTech
1. 13" 2-pot, FN01R-C 17x9 +35 (track), OEM otherwise
2. 4-pot ST-45 355mmx32mm Junction Produce Scara Japan 19"x10.5" +24 medium disk with step lip (does not fit without 10mm spacer!!!)
3. 13" 2-pot, iForged Essen 19x9.5 +45 and sometimes OEM sport 18's
4. 4-pot ST-45 355mmx32mm Anceltion SPSIX Revo 20"x10.5" +27 high disk
5. 4-pot ST-45 355mmx32mm Enkei NT03+M 18"x10.5" +30
6. 4-pot ST-45 355mmx32mm, RacingHart RS521 19x10.5 +22 (Barely Clears)
7. 4-pot ST-45 355x32, OEM 19"

Endless
1.Racing -4 Pot Calipers - 355mmx32mm VOLK G2 20X11 +15

Project Mu
1.

Rotora
1. 4-pot 355mmx32mm Volk GT-7 19"x9.5" +24 standard disk
2. 4-pot 355mmx32mm Junction Produce Scara Japan 19"x10.5" +24 medium disk with step lip
3. 4-pot 380mm x 34mm Maya GR5 20x10.5 +29
4. 4-pot 355mm x 32mm iForged Aero 20x10 +42 (also Volk GT-C 20x9.5 +47)
5. 4-pot 355mm x 32mm Volk SF-Challenge 19x10.5 +23
6. 4-pot 355mm x 32mm iForged Aero 20x10 +42 (sedan)
7. 4 pot 380 mm HRE 944 20x11 (might change to 20x10.5) G37
8. 4-pot 332mm x 32mm Rota Torque 18x9.5(Rota P45R 18x9.5)

Megan
1. 13.5" 4 piston with 18" Nismo's 18" Axis Reverbs, most Volk wheels, etc.
1. 13.5" 4 piston with 19" Seva S-Stars (daily) & 18" MB Weapons (track)

Wilwood
1. 13" 4 piston Wilwood factory kit with 18" Ray's Engineering 350Z Track 18's (18x8.5 +33 offset)

Ksport
1.

AP Racing (Stillen)
1. 13.5" 4 piston with 18" Nismo's 18" Axis Reverbs, most Volk wheels, etc

D2 Racing
1. 328mm / 6 piston with 19x9.5 Volk Racing GT-S (Sedan)

What about us Akebono guys?