Help With Megan Coilovers
 

Hello All,
Question?
I installed my Megan Coilover set-up on my car, No Instructions Included with them.

So here is the problem, my car is to damn low.
On a megan coilover can the lower spanner be adjusted? Or just the top two spanner nuts?

http://i18.photobucket.com/albums/b1...CDK-N3ZIx8.jpg
are the Boxes in red adjustable?

http://i18.photobucket.com/albums/b1...b/P1000093.jpg
This is what too low looks like.

that is really low...makes the oem 17s look not half bad lol...even tho there hideous

Wow thats low! lol

Bump: Anyone Need Help Thanks

yes, you use the "lower spanner" to adjust the height, just turn the thing to the left.

bustemupbob, let me know how high you are able to get your car after adjusting. I am thinking about these coil overs for my sedan but with same front and rear rate springs. I am just leary of them being too low like Tein. Do they have adjustable pillow mounts?

They will bring a sedan up to a 350Z drop or 1" with the recommended minimum amount of spring preload dialed in. If one wanted to add in some additional spring preload and possibly adding in a spacer above the rear height adjustment system you should be able to get a addtional 1/4"-1/3" of height.

Thanks Gsedan35, as always you are very helpful.