G35Driver - Infiniti G35 & G37 Forum Discussion

G35Driver - Infiniti G35 & G37 Forum Discussion (https://g35driver.com/forums/)
-   Brakes & Suspension (https://g35driver.com/forums/brakes-suspension-164/)
-   -   question 06' coupe:lowering on 20's here/input needed (https://g35driver.com/forums/brakes-suspension/172477-question-06-coupe-lowering-20s-here-input-needed.html)

neondeon88 Aug 14, 2007 09:59 PM

question 06' coupe:lowering on 20's here/input needed
 
ok heres my situation...I have an 06 coupe and i just put on the data replica from klumyzeee on my sport bumper. in order to get it to fit properly at the wheel wells i had to let the lip fit a bit lower then it should be, for a snug fit...it was the only option. i like the way it looks and its relatively low to the ground. so it is somewhat a PITA...now i want to put 20's on...Question is:
Should i get the tein 350Z H-techs w. the 20's? or will that spell disaster for my lip? I just want to close up the wheel well gap and make it look sweet. I don't need it SLAMMED to the floor...otherwise i'd be doomed here in NY. Thanks guys for any advice and input as to what i should do.
-Chris

Algy Aug 14, 2007 10:23 PM

you should post some pics to let all of us have a better picture.

but i think you should be good with 20's and tein h techs.

bigugly78cj5 Aug 14, 2007 10:54 PM

i guess its personal pref. but on my 20s everything sits great on 350z springs(i dont know if they drop or not, but i heard they do like .5 or so)...least in my opinion.... heres a picture ....

http://i19.photobucket.com/albums/b2...2222222222.jpg


http://i19.photobucket.com/albums/b2...2222222222.jpg

neondeon88 Aug 14, 2007 11:13 PM

big ugly....when u say 350Z springs, do you mean the H techs or stock Z springs. Looking good though man. I will post pics as soon as I can. So you can get an idea of where the lip is at.

bigugly78cj5 Aug 14, 2007 11:45 PM

thanks..and there stock 350z springs... i cant remember the year they came off of(revised or unrevised basicly) but i can find out if needed......

redlude97 Aug 14, 2007 11:47 PM


Originally Posted by bigugly78cj5
i guess its personal pref. but on my 20s everything sits great on 350z springs(i dont know if they drop or not, but i heard they do like .5 or so)...least in my opinion....

Whats your tire sizes though?

bigugly78cj5 Aug 15, 2007 09:11 AM

good point, my tire sizes are 285/30/20 in the rear and 245/35/20 in the front.....

G37Rider92649 Aug 19, 2007 08:19 PM

Tein H-techs For G35! Im Selling Them! Used! Pm Me!

EricIsKlumzyee Aug 20, 2007 02:11 PM

depends how low do you want to go.. you can drop it a bit more because 20s raises the car up a little so 350z h-techs would look very agressive while the g35 h-techs will give you a mild look

dcityjatt Aug 20, 2007 03:14 PM

can we do a side-by-side comparision of 350z h-tech vs. G35 h-techs please?

redlude97 Aug 20, 2007 04:18 PM


Originally Posted by Klumzyee
depends how low do you want to go.. you can drop it a bit more because 20s raises the car up a little so 350z h-techs would look very agressive while the g35 h-techs will give you a mild look

If you run the correct tire sizes, 20's shouldn't raise the car up any

EricIsKlumzyee Aug 20, 2007 05:02 PM

But he's running 245/35/20

- Eric

redlude97 Aug 20, 2007 05:08 PM


Originally Posted by Klumzyee
But he's running 245/35/20

- Eric

The guy who posted pics is running 245/35/20, the OP didn't post his tire sizes

EricIsKlumzyee Aug 20, 2007 05:13 PM

oops my bad scanned through the thread too quickly..

bigugly78cj5 Aug 20, 2007 09:40 PM

my fronts scrape going over dips in the road with descent speed(20+mph) its not bad, but i can see it on my tires and hear it when it happens.....


All times are GMT -4. The time now is 08:46 PM.


© 2026 MH Sub I, LLC dba Internet Brands