G35Driver - Infiniti G35 & G37 Forum Discussion

G35Driver - Infiniti G35 & G37 Forum Discussion (https://g35driver.com/forums/)
-   Brakes & Suspension (https://g35driver.com/forums/brakes-suspension-164/)
-   -   Where do I go for ceramic pads for a G35 with brembo's (https://g35driver.com/forums/brakes-suspension/370611-where-do-i-go-ceramic-pads-g35-brembos.html)

Retaliation Mar 17, 2011 12:25 PM

Where do I go for ceramic pads for a G35 with brembo's
 
I can't seem to find any street driver ceramic pads anywhere other than hawk. Can someone point me in the right direction for where I can get some ceramic pads for this? I've read on this forum that a lot of people don't speak too highly of hawk so I wanted to avoid them. I'm dead set on getting some pads that don't cover my wheels in brake dust.

G35fromPA Mar 17, 2011 04:54 PM

Project Mu NS don't cover your wheels with dust, and have great bite like the OEM Brembo pads do. I really like them so far.

vinco Mar 17, 2011 06:04 PM

How 'bout stopping by your friendly local Advance Auto Parts - they have a few different brands of ceramic pads listed, but you'll likely have to order them and wait a day or so for them to arrive.

in2win Mar 18, 2011 02:42 AM

axxis ultimates, best pads I've ever had for my brembos. Much better than OEM pads..

Trade offs are a ton of dust...


search for ROTORWORKS In garden grove, CA. best prices around

RacerX35 Mar 18, 2011 06:02 PM

I have had no problem with the Hawk HPS. They worked so good that I went ahead and bought a set for the next brake job. I forget how long they lasted, but it was a long time. Depending on where you are. I went through mynismo.com and they shipped that day to the shop I had doing the work.

Good luck,

Ray

nghiars Mar 18, 2011 08:16 PM

as far as stopping.. i liked the OEM set up best but the break dust was unbearable.

I had Hawk Ceramic pads and the fixed most of the dust problems... initial bite just wasnt as good as OEM.

My next setup was the Project MU NS pads. they have good but and minimal dust however they ate away at my rotors a bit more than the.

the_sedan Mar 18, 2011 09:35 PM

fvck hawk hps pads. i've turned my rotors and sanded the pads 2x and they still squeal! and im runnin pepboys ceramics in the rear....low dust but the basturds squeal too off and on! imma run Mus next if they are ceramic unless axxis has some ceramics.


All times are GMT -4. The time now is 01:34 PM.


© 2026 MH Sub I, LLC dba Internet Brands