OEM Fender to Ground Measurements
 

could anyone confirm the figures I have listed below for a 2005 coupe:

- F 27.52
- R 27.95

thanks

wat part of the fkn fender are u measuring from?

the figures I referenced above I found on this forum after a search. I have not had the OEM suspension on this car since I bought it new in 2005.

I need the OEM figures to check against the drop I currently have on my car.

The measure would be at the apex of the fender, through the center line of the wheel cap to the floor.

would appreciate it if anyone could confirm those figures.

thanks.

According to the factory service manual it says:

225/50R17 (Front) 691mm (27.20in)
235/50R17 (Rear) 702mm (27.64in)

225/45R18 (Front) 694mm (27.32in)
245/45R18 (Rear) 710mm (27.95in)

Fuel, radiator coolant and engine oil full. Spare tire, jack, hand tools and mats in designated positions

Thank you for this info. Did it say anything about 19 inch wheel/tire?

I'm at my work computer, but the FSM does have 19" wheel info.

Since nicoclub FSM site seems to be blocked from work, here's a measurement from my 06 before I dropped it. Crappy angle, but I want to say it's around 27.5"

Front:
Attachment 182145


Sorry, don't have a rear pic.

That info was for a 2005 coupe. Im guessing 06-07 came with the 19's. Here ya go..

225/40R19 (Front) 699 mm (27.52 in)
245/40R19 (Rear) 710mm (27.95in)

thank you guys for all of your help...appreciate it!