Questions on Tein's CS and Camber
 

Here's my setup. 05 coupe with 19x9.5 Volk Sf Challenges, 19x10.5...bought a set of Tein CS...will I have camber issues? I also bought the SPC rear camber kit too...Now do I need to put them on or am I better off selling the camber kit? Looking to perserve my tire life and I currently have tananbe NF springs on but they are going to go once the Tein arrive.

Any help is appreciated THANKS!

it all depends on how much you lower it. if you plan on going a lot lower, keep the kit and look into some front A arms.

Where is the safe zone on how much I can lower it? can I go all the way down?

definetly not. its hard to say as it varies from car to car. if you use the arms and kit i would think you can dip down pretty low. you just gotta experiment.

The only issue you will have is with the front camber... The best way to solve this is also the most expensive... the 350 evo A-arms will get your front back into spec & the rears should not be an issue with the spc kit... I have the same exact setup but will have it installed in 2 weeks. I can let you know how it works out for me...

He will also have rear camber issues. I'm all the way down in the rear and needed to correct the rear camber/toe with a SPC kit if I wanted to save my tires.