waxed my wheels using poorboy's wheel sealant...help
 

Just finished washing my car and for the first time, used some poorboy's wheel sealant on my new wheels. Since the wheels are 2 piece (work t1s), when it was time to wipe down the wax, the wax got inside the crevices between the face of the wheels and barrels...its a pita too try and wipe it off and there is wax stuck inside. What are the methods you guys use to take the excess wax from those crevices? Since the wax is pink, damn, that stuff is very noticeable. any help is appreciated.

try using a detailer soft brush.. the kinds that you usually use for the interior. that's what I used. make sure the bristles are soft and won't scratch

Either a brush, or take something that is thin and rubber or wooden and wrap a microfiber towel around the end. This will help as well.

George

ya I usually use a paint stick with mf on the end

i some times use a tooth pick very carefully

Microfiber glove

thanks for the reply guys, will try it next time i clean my wheels!

I would do it soon, the longer you let the wax sit, the harder its going to be to remove later.

^^yea, i took most of the wax off already, but it was a PITA...good lookin' out though!!

Thanks to everyone that's commented!