G35Driver - Infiniti G35 & G37 Forum Discussion

G35Driver - Infiniti G35 & G37 Forum Discussion (https://g35driver.com/forums/)
-   Drag (https://g35driver.com/forums/drag-59/)
-   -   1st time at the drag strip. 1/8 mile results. (https://g35driver.com/forums/drag/452058-1st-time-drag-strip-1-8-mile-results.html)

dpierce33967 10-24-2015 10:10 AM

1st time at the drag strip. 1/8 mile results.
 
I went to the 1/8 mile track in Immokalee, FL for the first time. The temperature was around 73 degrees last night. The altitude there is around 35ft. I just bought the car about a month and a half ago. Keep in mind my times were fully loaded with spare and a child's booster seat since my wife and daughter went with me.

Info

2003 G35 6mt
Non-rev up
101k miles

Mods:

18" 350z Anniversary rims and 245/40/18 tires. Tire psi was lowered to 25 psi at the track.
2.25" DNA motoring HKS replica exhaust with a Magnaflow 2.25" perforated x pipe welded in.
Stillen Intake
350z z tube

Timeslip:
I am on the right. (32)

https://cimg4.ibsrv.net/gimg/g35driv...83664a3cac.jpg


I launched around 2500-2700 rpm's which netted me around 2.1-2.2 60 ft with some practice

The time on the left is of a 2008 Bullitt Mustang. Unknown mods.

Also, there was a Silver 2008 Infiniti G37 coupe. I am not sure if it was automatic or stick shift. I forgot to ask. Potenza tires but looked a little wider than stock width. He said he had full exhaust, intake, and a uprev tune. I think he said that he dynoed around "305 rwhp." I did not think his time slips matched his power as stated, but who am I to say anything to anyone.

The G37 coupe's time on one particular run was

.1204 Reaction
2.2941 60 ft
6.1590 330 ft
9.2749 1/8 mile
79.16 1/8 mph

I did see the g37 run 9.1 something once or twice.

Overall, I had a good time. I know I need to practice, but that will come with time.
I just bought a NX wet shot kit from Dass-Mayweather on 350z forum. I plan to install that next Saturday. I would like to run a 75 shot. I will install a RPM window switch (3k-6k RPM's), bottle heater, purge kit, and LFR6A-11 plugs (one step colder-copper). I would like to get on a dyno to check where I am at NA and to check AFR's with the Nitrous to make sure everything is ok. I do not plan on getting a tune just yet. I know that some people might be against me running Nitrous and no tune.

Mignav01 10-27-2015 11:45 AM

1st time at the drag strip. 1/8 mile results.
 
lordy. is 2.x seconds an average 60 footer for a G? I'm used to mustangs and 1.x's. looks like you know what you're doing, maybe some weight reduction and especially that 75 shot will help a ton


All times are GMT -4. The time now is 01:10 AM.


© 2024 MH Sub I, LLC dba Internet Brands