Are the Intake and Exhaust Solenoid the Same Part?
#1
Are the Intake and Exhaust Solenoid the Same Part?
I am very new to car maintenance and have been trying to learn how to do things on my own. I have a 2008 G35x, and I recently got a check engine light with P0014. My main issue is occasional rough idling and intermittent stalling at low speeds. My understanding is that this is usually a camshaft position sensor, exhaust valve sensor, or crankshaft sensor. I thought that I would check the exhaust valve sensor first and see if it needed to be cleaned. I feel like such an idiot, because I apparently pulled the intake solenoid (front of engine bay) instead of the exhaust solenoid. It was very stuck, and I ended up breaking it getting it out of the engine block. When looking at the parts diagram, I don't actually see a separate intake/exhaust valve solenoid. Is the same solenoid used for both? From what I can see in the diagram, the exhaust solenoid is next to the camshaft sensor. Do I have to remove anything to get access? It seems really tight, and I'm not sure that I can get it out. I appreciate any help.
Thread
Thread Starter
Forum
Replies
Last Post
chris87
V36 Engine, Exhaust, Drivetrain & FI
6
10-23-2019 02:25 PM
bgoods
G35 Coupe V35 2003 - 07
7
04-28-2019 08:03 PM
Lartytiejdke3
G35 Coupe V35 2003 - 07
18
01-02-2016 12:43 AM
jhonathang35
General Tech Questions
2
11-22-2013 02:02 PM