FS: 3.5" Custom polished short ram intake kit
#1
3.5" Custom polished short ram intake kit
SOLD
Intake will also include couplers & polished clamps you see in the below pic
I had this installed with my NWP Big Bore throttle body so the coupler on the throttle body side is meant for the 75mm opening. You'll need a reducing coupler like the one on the other end of the intake if you wish to run it with an OEM throttle body.
It has a couple of small nicks. I can provide additional pictures if desired.
No air filter is included. This intake sits between your throttle body and MAF housing, same as OEM.
There is NO vacuum port on the backside of this intake but I am also including, the needed filter/breather for the back of your drivers side valve cover (see 1st pic below) where normally a vacuum/breather hose would come out and connect to the oem intake.
PM if interested
Thanks
Intake will also include couplers & polished clamps you see in the below pic
I had this installed with my NWP Big Bore throttle body so the coupler on the throttle body side is meant for the 75mm opening. You'll need a reducing coupler like the one on the other end of the intake if you wish to run it with an OEM throttle body.
It has a couple of small nicks. I can provide additional pictures if desired.
No air filter is included. This intake sits between your throttle body and MAF housing, same as OEM.
There is NO vacuum port on the backside of this intake but I am also including, the needed filter/breather for the back of your drivers side valve cover (see 1st pic below) where normally a vacuum/breather hose would come out and connect to the oem intake.
PM if interested
Thanks
Last edited by G35Papa; 06-27-2017 at 01:21 PM.
#7
hmm.... I need an NWP tb.. good price on the intake... just posting so I can keep an eye on this
The following users liked this post:
G35Papa (01-18-2017)
Trending Topics
#14
Yes, basic intake but larger diameter. Everything you need (minus another reducing coupler) is there to install.