G35Driver - Infiniti G35 & G37 Forum Discussion

G35Driver - Infiniti G35 & G37 Forum Discussion (https://g35driver.com/forums/)
-   Forced Induction (https://g35driver.com/forums/forced-induction-24/)
-   -   Looks like I'll be joining you guys (https://g35driver.com/forums/forced-induction/35609-looks-like-ill-joining-you-guys.html)

EX250 Oct 21, 2004 01:42 PM

Looks like I'll be joining you guys
 
Well, I finally have a winter car now, so FI on my G35 is now third on my list. Right now Im having a clutch/flywheel/pressureplate high speed balanced to go on. Next up is rims. So that leaves next springs car money going to some form of F/I. Opinions (budget for the project is about 8-8.5K including labor and tuning, I think this should be enough but what is everyone elses experience?) on a kit would be appreciated, and I seem to be looking at the Vortech S/C the most heavily. TT would negate some of the mods I've paid so much for (namly the headers) so I've been drifitng away from the TT kits. Also, I'm going to be adding the Nismo bumper that I have in the garage next spring. I've noticed the JWT dual single core intercooler setup seems to be designed to mate with the stock air holes in the bumper. The Nismo holes match position, but differ in size (slightly larger at all curves). Would it be possible to mimic this intercooler setup going with a differnt F/I kit and about how pricey would something like this be? Thanks.

2003 Black 6MT
JWT/Z tube, UR pulley set, Crawford Headers, Cats and v5 Plenum, Injen SES, TS ECU Crawford tuned, JDM Pedals, JDM battery cover, G-tech RR.
More mods to come....stay tuned.

gspot35 Oct 22, 2004 09:59 PM

Re: Looks like I'll be joining you guys
 
Look at a single turbo kit that pipes the catalytic converter. Nice setup.

http://www.imagestation.com/picture/...f.jpg.orig.jpg

MEGA_BB6_Turbo Oct 22, 2004 11:00 PM

Re: Looks like I'll be joining you guys
 
well so far my twin turbo kit cost around $7k alone..typical installations run about $1200-$1500...consider turbo timer (70-100), blow-off valve (150-250), exhaust (varies) and other small things like meters, etc.

if you're planning to build the internals, this is where it gets really expensive!! ECU, rods, pistons, machine shop labor, etc. etc. buuut that's another story =)

Although if installing the turbo straight out of the box...i say at least expect 9k-10k with labor extra parts and everything unless u have a hookup.

2004 Infiniti G35 Coupe IP/6MT/Navi
--------------------------------------
Top Secret Bumper bought
PE Twin Turbo by Nov.
VQ block build started (Pauter Rods bought)


All times are GMT -4. The time now is 04:17 PM.


© 2026 MH Sub I, LLC dba Internet Brands