rear camber kit question
#1
#2
lazy to dremel out bigger holes?
#3
I see.
well I had a lot of screws on the ground, and it was hot outside, so I was just putting back on the bolts with the camber kit on, and I realized when I put everything back together that I had the toe bolts in the trunk still.
I just wanted to know if theres a big diff.
Ill probably just ask the shop Im going to get an alignment at if they need the toe bolts to correct the camber I guess?
well I had a lot of screws on the ground, and it was hot outside, so I was just putting back on the bolts with the camber kit on, and I realized when I put everything back together that I had the toe bolts in the trunk still.
I just wanted to know if theres a big diff.
Ill probably just ask the shop Im going to get an alignment at if they need the toe bolts to correct the camber I guess?
#4
#6
#7
Trending Topics
#10
Registered User
iTrader: (10)
#11
#12
#14
There are 2 sets of identical concentric bolts(toe bolts) on the rear suspension which look exactly the same. One set is located on the end of the springbucket(holds the spring) and one on the end of the camber arm. You want to replace the one on the end of the spring bucket