Mike's Mount or BlendMount..? RADAR MOUNT..??
 

For those of you that have had the Mike's Mount, BlendMount or BOTH....
Do you guys have any thoughts or concerns you could share...??

thankx in advance...!!

Alf

I have a mikes mount and I love it.. perfect place to have my radar detector. easy to install easy to use never had a problem

Is Mike's mount still available?

There is a used one in the marketplace, right now not sure about new though.


I have a Mikes in all three of my vehicles not one complaint about them. They are sweet for placement and also not more sh!TTY suction cups falling off the window.

IMO, as long as it does the job, they are all the same. One may look slightly different from the next, but once it's installed, they are all the same.

Thanks peeps..

Mike's Mount FTW. And if the one in the Marketplace is less than $20 OP i suggest you jump on it. Best interior mod I've done.

http://i663.photobucket.com/albums/u...eague7/006.jpg

It's sold already.! FACK.!! I read a thread from someone that had both over a period of time with pictures but I searched and can't find it...

Does Anyone know what size in inches of an invisicord I would need. Is 8" long enough..?

Just like my girl says, 8" is plenty :)

Mike is still selling these new for a good price.. I just confirmed with him the other day.

I just bought a mount from Mike for V1 and a 8in cord from stealthcords, it was just fine. If you order from stealthcord use "Nicoclubsponsor" for the discount code and Dave a few bucks.

Thanks again.!!

mike's mount is the way to go.

I've had my Mike's mount several years. I did have to remove it once, and reinstall. The only negative that I could comment on was that the tightenining screws that hold the radar detector clamp to the Mike's mount can strip relatively easily if you overtighten them. I believe one of the other mounting products might be a metal mounting assembly as opposed to the plastic assembly from Mike's mount. Not sure if the assembly has changed over the years, or if the screw holes now include metal sleeves in the mounting assembly.