What did you do to the G today?
#1564
#1568
#1572
[QUOTE=Juang20;6890538]
Sweet you got any pics of the projection. Yeah they were intended for the newer Infiniti's but just like you I modified them a bit and got it to work. How did you turn the projection around? I have an idea but I haven't been able to take it apart with my busy work schedule getting in the way.
Hey sorry for the late reply, was really busy with exams. Anyway I turned the projector around simply by opening the part where the projector sits, all you need is a diamond head screw driver and then you can push it out with the screw driver but make sure you put a cloth over the tip so you don't damage the projector lens. Rotate it exactly 180 degrees so it'll match the other projector.
Here are some pics of mine, they're rushed and my phone camera sucks but you get the idea:
With flash:
Without flash:
I should've taken a close up so you can see the word "INFINITI" beneath the symbol... Oh well.
Your projection seems to be brighter though, unless your camera is just better haha.
Sweet you got any pics of the projection. Yeah they were intended for the newer Infiniti's but just like you I modified them a bit and got it to work. How did you turn the projection around? I have an idea but I haven't been able to take it apart with my busy work schedule getting in the way.
Hey sorry for the late reply, was really busy with exams. Anyway I turned the projector around simply by opening the part where the projector sits, all you need is a diamond head screw driver and then you can push it out with the screw driver but make sure you put a cloth over the tip so you don't damage the projector lens. Rotate it exactly 180 degrees so it'll match the other projector.
Here are some pics of mine, they're rushed and my phone camera sucks but you get the idea:
With flash:
Without flash:
I should've taken a close up so you can see the word "INFINITI" beneath the symbol... Oh well.
Your projection seems to be brighter though, unless your camera is just better haha.
The following users liked this post:
JG_G35 (04-16-2014)
#1573
So I finally got some pics of the cutoff, this was the flattest wall I could find without wasting too much gas. Don't mind the colour, it's the wall colour being beige/tan. There's also a bit of glare from the lens being dirty.
Here's the top 2 projectors:
Here's the quad projectors:
Here's the high beams:
Tonight was literally the perfect night to take pictures of the output, parts of the city had a power outage so it was pitch black. Just as I was about to get a picture of the output on a flat road the power came back on....
If you have a good imagination I'll just tell you that they turn dark roads into day and they shine far and really wide (I could look next to my side mirror and see my lights). When an oncoming car is driving towards me with their high beams I'll tap my high beams once and they'll immediately turn theirs off.
They're 55W ballasts with 6000K bulbs, I'm sure I don't have to explain why there are 2 cutoff points.